Results 1 to 10 of 16
Like Tree16Likes

Thread: 1st comfortable 8k shave!

Hybrid View

  1. #1
    Senior Member rlmnshvstr8's Avatar
    Join Date
    Oct 2014
    Location
    Jefferson City, TN
    Posts
    402
    Thanked: 43

    Default 1st comfortable 8k shave!

    I finally had my first comfortable shave off my shapton 8k. I tried as best as I could to set the bevel on the shapton 1k. I begin feeling paranoid in analyzing the edge wanting to make sure that it was set. When I was convinced that I could see no reflection at the edge.

    I moved to the 4k for about 25 laps then moved to the 8k. And after 25 laps I went to the crox for 20 laps but made a mistake, but I stropped and tested. Didn't cut through one Wisker before going back to the 4k. Done 40 circles each side and 25 more laps. Moved to 8k for about 30 laps.

    I looked under a set a loupe to make sure there was no microchips. Done 35 laps on crox then 50 linen and 80 latigo. Test shaved and it felt smooth.

    (By the way I can't seem to do any "tree-topping" until after a stropping)

    So I thought I would go ahead and take the week's growth off. It was a very comfortable shave. Really enjoyable. I couldn't get my 100% BBS on my ATG. But it was decently close. I had to strop at least once before my ATG to get it cutting again, but still not quite what I want. I want to get better closer shaves with the edge lasting longer, but this close is definitely livable and I can see that you can live off a 8k edge.

    Quick question though. Is not the shapton 8k finer than a norton 8k so would this be slightly cheating while I am chasing a comfortable 8k edge?
    A fool flaunts what wisdom he thinks he has, while a wise man will show that he is wise silently.

  2. #2
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,552
    Thanked: 3795
    Blog Entries
    1

    Default

    Oh H&LL, it's in the ballpark so don't worry about it. If you have Shapton then work with Shapton.
    The point is to get a comfortable shave somewhere between the bevel setter (which can shave but not very comfortably) and the finisher.
    Euclid440 and eddy79 like this.

  3. #3
    Senior Member blabbermouth eddy79's Avatar
    Join Date
    Feb 2013
    Location
    Gosnells Perth Western Australia
    Posts
    7,233
    Thanked: 656

    Default

    Congrats. As long as you are shaving comfortably you can refine it on your future attempts. Just enjoy the comfy shave moment
    My wife calls me......... Can you just use Ed

  4. #4
    Senior Member 2Sharp's Avatar
    Join Date
    Oct 2007
    Location
    Fulton, Missouri
    Posts
    846
    Thanked: 183

    Default

    My experience with the 8K Norton and Shapton is they both pretty much do the same job but the Shapton cuts faster and has better feedback. Don't be afraid to go back to the 4K and work your way back up to fine tune your razor. It seems the big job is done already. [Bevel] bj
    gssixgun and Euclid440 like this.

  5. #5
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    27,068
    Thanked: 13249
    Blog Entries
    1

    Default

    Hehehehe People tend to put way to much faith in "Grit Charts" that are at best inaccurate and at worst downright deceptive...

    The Shapton 8k is without a doubt a higher grit hone then the Shapton 6k

    and

    The Norton 8k is without a doubt a higher grit hone then a Norton 4k

    How the Norton 8k and the Shapton 8k relate to each other in grit ratings is very much in Doubt toss in a few more brands of 8k and that whole grit chart gets very doubtful...

    Yes you should be able to shave quite well off of the Shapton 8k

    Here is another fact that I have no doubt of "The more razors you hone, the better your edges will get"
    FranfC and cthulhu like this.

  6. #6
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,454
    Thanked: 4830

    Default

    Congratulations. Tree topping and other hairs tests vary from person to person in part because the hair varies. The all need to be calibrated, depending on the hair your ability to tree top may or may not be relevant. Use a known shave ready edge to perform the tests and note how the edge cuts the hair and compare your edge in the test.
    It's not what you know, it's who you take fishing!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •