Originally Posted by
Euclid440
Yup, good progress, once you get the bevel fully set, it will not take much effort or time to re-set the angle.
Ink the bevels and spend some time on the toe and heel, adding a finger of pressure and get them to meet. It is not uncommon for the heel and toe to need more attention especially with that much wear and tape.
Also, as said, keep the tape tight and change the top layer as it wears. You will see bits of tape in the swarf and feel it on the stone. If you feel a bump or sticking on the stone, stop and check your tape, probably burned through the top layer.
Good photos and progress.