Page 1 of 3 123 LastLast
Results 1 to 10 of 30
Like Tree38Likes

Thread: Coticule finish, sans slurry

  1. #1
    Senior Member
    Join Date
    Oct 2015
    Location
    Vermont
    Posts
    167
    Thanked: 8

    Default Coticule finish, sans slurry

    After a long and tedious chase to locate and purchase a coticule that I feel can finish a razor as well as any high end jnat, I finally found the one.
    I used the stone with great delight, and produced edges that are supremely smooth, compared to the synthetic edges I am so used to. You can imagine my Cheshire lIke grin, as I shaved a full 3 passes with ultimate comfort.
    After a while, I decided to look at the tube to see if there are any methods of finishing with a coti that would increase the keenness and still hold onto the smooth buttery feeling that we all love so much.
    What I found was a method from a tuber named drmatt357. A finishing technique that uses no slurry, only honing under running water.
    I went to the sink, and began the course. After only a couple of minutes I started to get a very sticky, squeegy like feeling on the stone. This, drmatt357 said, is what I'm looking for. Once I achieved this feeling on the hone, I did just a few more passes with little to no pressure at all, and went to the strop to align and clean it all up.
    What I saw under the scope was nothing short of amazing. A bevel that is so highly reflective that if appears to be black, with little to no scratch pattern to speak of, and a dead even and fine straight cutting edge.

    Now to the shave den....3 passes later, I have the smoothest and most irritation free bbs shave I've ever achieved from my own honing job. It's seriously amazing! I highly recommend that anyone who uses a coti to finish, check out drmatt357 on the tube, and try this slurry free method of finish. You won't be disappointed in the least!

  2. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Thanks for the info. I've never tried it under running water, but I've finished on coticules sans slurry for 8 years, and still do.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. #3
    50 year str. shaver mrsell63's Avatar
    Join Date
    Aug 2008
    Location
    Pothole County, PA
    Posts
    2,258
    Thanked: 522
    Blog Entries
    2

    Default

    Thanks for the drmatt info. I will definitely try this method. I have long been a fan of the unicot method with great success.
    JERRY
    OOOPS! Pass the styptic please.

  4. #4
    Senior Member doorsch's Avatar
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    1,301
    Thanked: 540

    Default Coticule finish, sans slurry

    Mhh ok nothing new but yes it works, why shouldnt it ? You can do this with Thuris, Jnats and many other stones, surely with coticules...i prefer to do so with thuris and Jnats sometimes....
    Last edited by doorsch; 05-19-2016 at 07:41 PM.
    ███▓▒░░.RAZORLOVESTONES.░░▒▓███

  5. #5
    50 year str. shaver mrsell63's Avatar
    Join Date
    Aug 2008
    Location
    Pothole County, PA
    Posts
    2,258
    Thanked: 522
    Blog Entries
    2

    Default

    For us old hands it's nothing new but for the uninitiated honers new the sport, it tends to be interesting and valuable info.

    Isn't our primary purpose to help those in need? There are pleas for assistance on a daily basis coming from new guys........ ©[:- ))))))
    JERRY
    OOOPS! Pass the styptic please.

  6. The Following User Says Thank You to mrsell63 For This Useful Post:

    bsohm (05-20-2016)

  7. #6
    Senior Member
    Join Date
    Sep 2013
    Location
    NW Indiana
    Posts
    1,060
    Thanked: 246

    Default

    Personally I have always preferred to use only water on my coticules when razor honing. Slurry honing - at least with my particular stones - convexes the edge enough that it takes a lot of work to get back to the edge through dilution back to straight water again. Sometimes I will do unicot with a razor and use slurry though. All of my coticules are ridiculously quick with slurry, but much slower and finer on straight water once they're "broken-in," or burnished up a bit.

  8. #7
    Senior Member
    Join Date
    Oct 2015
    Location
    Vermont
    Posts
    167
    Thanked: 8

    Default

    My bad, I didn't mean to imply that you don't know everything already. This was actually meant for those that are die hard slurry honers, not honing royalty like yourself sir. I should probably take this article down since it's such obvious information huh? I mean it's pretty basic stuff, right?

  9. #8
    Senior Member
    Join Date
    Sep 2013
    Location
    NW Indiana
    Posts
    1,060
    Thanked: 246

    Default

    ?? Get up on the wrong side of the bed this morning?
    doorsch likes this.

  10. #9
    Senior Member doorsch's Avatar
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    1,301
    Thanked: 540

    Default

    Looks like a bit of "Drama"....

    Great you share your findings here and great that that you refer to Dr. Matts Videos which are really excellent...

    Actually depeding from this you should be able to accept that for some people this is no news....

    well great you did it...many others did before....many new honers will do in future....
    JimmyHAD and Druid like this.
    ███▓▒░░.RAZORLOVESTONES.░░▒▓███

  11. #10
    Senior Member Druid's Avatar
    Join Date
    Mar 2014
    Location
    Mysterious Adirondacks
    Posts
    773
    Thanked: 136

    Default

    Not to disrespect anyone here, or their ideas, but finishing under running water is nothing new. It was discussed on the old coticule.be, and if memory serves, no one laid claim to being the discoverer, or calling it "his" method. I'm sure the technique has been used for a long time.
    I guess my skin is more sensitive than some, because with my better coticules, I still finish on faint slurry.
    Last edited by Druid; 05-20-2016 at 02:19 PM.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •