Thread: Help honing this please.

I have a Greaves & Sons sheaf works antique restored razor that has hone ware on the spine. The bevel of the razor is ground wider directly below where the hone ware is located the spine. The stone is hitting that bevel but not the edge. It will not sharpen in that spot. The rest of the blade will sharpen. The blade has some wobble on that side although it is not much. Should I grind it more? It is thicker on that part of the spine. My guess is that the spine ware is causing that part of the edge to grind on the start of the bevel angle and not the true edge itself. Should I tape the sharp edge and grind out the spine in that spot until the hone ware is across the whole spine then take the tape off and put some on the spine and try to sharpen it that way? Let me know what you think. Or is this razor too far gone to begin with?