After the last pyramid, should I do say 10 additional laps on just the 8000 side or should I still be doing the 1/5 pattern to finish?
i.e.
1/5
3/5
5/5
3/5
3/5
1/5
1/5
1/15
or just
1/5
3/5
5/5
3/5
3/5
1/5
1/5
1/5
thanks.
Printable View
After the last pyramid, should I do say 10 additional laps on just the 8000 side or should I still be doing the 1/5 pattern to finish?
i.e.
1/5
3/5
5/5
3/5
3/5
1/5
1/5
1/15
or just
1/5
3/5
5/5
3/5
3/5
1/5
1/5
1/5
thanks.
I've had good success doing either. I've had easier success doing 30-40 8k strokes at the end for "finishing". I say it this way because I know many other members use a coticule for finishing or some other higher grit hone.
The problem I had initially with the pyramid was hitting the target and testing the edge enough (like after each pyramid).
Bump:
Since I am sans Couticle or 12k Chinese I am just trying to figure out what is the best way to finish.
Currently I am doing my pyramids like a good little boy (yes, yes, I know "different strokes different folks :roflmao ) followed by linen (thanks Tony!) followed by latigo (thank Tony! x2). I can pop hairs on my arm but it still pulls when I shave! (After a 15-30 minute shower, pres-shave oil, and a silvertip badger brush with some nice trumpers almond!)
Also... just to add information... I own, and have watched, both Lynn's DVD and Bill's CD not to mention various videos/pdfs in SRPs own library! (And I will also admit I am a bit heavy on the end of my stroke! :( )
So any finishing suggestions that would help me out while I acquire my true finishing stone would be great!
Quote:
Originally Posted by rupert87
Try stropping 80 to 150 laps on your local newpaper's want ads section (lotsa' print ink = better). Put 2 to 4 layers on something flat like your hone. Works ok for me after a Swaty or 12k hone, too.
Whether you bump it or not, I'm sticking to my answer from September. :)
Derek,
Are you looking for advice on getting the most out of your Norton, or would you consider getting something to supplement it? A paddle strop from Tony pasted with chromium oxide will give you edges that are hard to beat for the price. You could also get Dovo's red and black pastes and apply them to the linen side of your hanging strop, or even a piece of hardwood like poplar.
A coticule bout of reasonable size would only run you about $50 or so, and the Chinese 12K is dirt cheap for what you're getting. :)
Josh
Thanks Josh!Quote:
Originally Posted by JoshEarl
I think I am mostly looking for more information about how to get the most out of my Norton. I know there are plenty of great other options for finishing. But thank you for the write-up! I am always ready to learn something more!
But I am interested in understanding more about the newspaper trick!
This link for info on newspaper compared to some hones. My Grandfather and a lot of old-timers used it regularly. In a pinch it can even substitute for a leather strop. I use it right after my finishing hone.
Some say newspaper ink acts like a fine paste. I just know that it seems to make my edges sharper, and less likely to cut me, all at the same time. I also use newspaper to dry the very edge after shaving, 1 or 2 laps right before the mineral oil (my local climate is quite humid in the summer).
Try it and see how it works for you. Let us know what you think.
If you're looking to learn more about finishing on the Norton, I'd suggest reading everything you can that Alan (AFDavis11) has written about it. You can search for his username in the advanced search section.
Alan can get way more out of that stinkin' hone than I ever managed. And he's got a knack for explaining things to boot. :)
Josh
Thanks Josh! . . . the $10 spot is in the mail. Next week can you say your shaving with one of my blades?
You can achieve a very wickedly sharp edge with just the Norton 8K. A finishing stone is not necessary.
If the razor s still not as sharp as you want it then go back to a
3/5-10 ( between 5-10 laps)
1/5-10
1/5-10
Then finish up as Alan suggests with just the 8K side
What your looking for is a discernible change on the sharpness of the edge. Use your sharpness tests frequently.
I don't really have any new information to add just encouragement.
I am a die hard fan of the Swaty as a fine finisher though I always shave test before using it to get an idea what the razor still needs. Once, and only once (so far), have I really hit the razor G-spot off my 8000 and this is one of the smoothest most durable edges I have ever gotten. Keep at it the 8000 is capable of an incredible edge, one I will be working harder for in the future.