Can i lap/ flatern my 12k KITIYAMA STONE with my norton flaterning stone? thanx gary
Printable View
Can i lap/ flatern my 12k KITIYAMA STONE with my norton flaterning stone? thanx gary
I wouldn't, as I find the Norton Flattening stone to leave
far too coarse a surface on the stone. Althought this is
not guaranteed to affect the performance of the lapped
stone, it sure affects the feel of the razor on the stone.
I would use a DMT-C.
- Scott
Not only that, but The norton flattening stone is quite soft, and if you use it to flatten a hard natural, it gets worn unevenly.
What would you recomend to use i have heard i could use my norton 8k side to lap the 12 k kitiyama stone would you agree with this by the way lynn says he uses is norton flatterning stone to lap 12k stone.i don't want to damage my stone so not sure what to do for the best. gary
I've heard that 12K is very difficult to lap the first time. Give the Norton flattening stone a try, but if you don't seem to be making much progress, consider switching to sandpaper to knock down the high points. Once it's flat you should be able to maintain it easily.
Josh
Are you thinking of the Chinese 12k Josh, or have you heardQuote:
I've heard that 12K is very difficult to lap the first time.
the same thing about the Kityama?
- Scott
To be fair i have just recieved my kitiyama today and looks realy flat.So i supose a quick lap with my norton should be ok then josh. How often do i need to lap my stones. i won't be using them that often. Do i lap every time i use them or just now and again. gary
My bad; I was thinking of the Chinese 12K.
Give the Norton a try. If it seems like it's taking too long, you might want to consider another medium for the initial lapping. :)
Josh
i personally use the dia-sharp DMT-coarse stone to do my flattening now. totally in love with this stone. it works fast but not so fast that it leave striations or anything of problems.
did my chinese 12k and was able to wash it with water and go right to using the stone on a blade without any problems.
its not expensive and buy a "hone holder" rubber thing when u get one
~J