Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Member
    Join Date
    Sep 2007
    Location
    Manchester, UK
    Posts
    95
    Thanked: 11

    Default Hone to replace Norton 4k

    I've been honing for a while now, and while I've only managed to get 3 or 4 razors to the point where they will shave me (I'm not quite happy with any of them yet), I think I may be starting to get the hang of it.
    My problem lies in the feel of the Norton 4k. It feels gritty, and I just hate honing on it. While it instantly shows up any flaws in my technique (You feel like you're trying to cut throgh a brick if you tilt the razor a tiny bit off), and I may see the merit of it as a training tool from that point of view, it just isn't nice to hone on. I don't like it.
    The Norton 8k feels velvety smooth, and seems to suck the blade to the hone ever so slightly. I get to like the 8k more every time I use it.
    My coticule with slurry, I also love. While I can feel the garnets cutting, it doesn't feel rough. And the slurry seems to either be quite forgiving of an imperfect stroke, or actually tend to correct your stroke by a bit of suction or magic, I'm not sure which yet.
    I don't actually like my coticule with water so much as it is a bit more like honing on glass, I like my Thuringian I got from Kees more for finishing with water.
    I also dislike the lack of feedback from my spyderco medium and fine hones but I'm getting used to them a bit more.

    Now, after what turned out to be a mega rant on rocks, I think I want to replace my Norton 4k. Given that the feel of the hone is my primary concern, and I can't discern that from any literature or what have you, I thought I'd ask you guys for some suggestions. I want to get a 1k hone as well, as I currently only have my coticule for setting bevels.

    I've been thinking about the Shapton Pros and the Naniwa Chosera hones. What do you guys think?

    Connor

  2. #2
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default hone

    i do use slip stones.they are very cheap and it is norton but doesn;t look like exact material norton 4/8k has.slip stones are small and what i have done i have clued them together and made surface same level.it does the job but of course it is very small.i have 1k/4 japan hone and only use 1 kside when i set up bevel to razor come from ebay and really in bad shape.i bought slip stones from Woodworking Plans & Tools | Fine Woodworking Project & Supplies at Woodcraft

    hope this helps

  3. #3
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    Before you change stones, lap your Norton 4K down about 1/8 inch. The new ones do feel gritty until you get past it. I will feel much smoother after this lapping and will produce better results as well.

    Let me know how it goes. We can always find different stones for you if you still don't like the Norton.

    Lynn

  4. #4
    Member
    Join Date
    Sep 2007
    Location
    Manchester, UK
    Posts
    95
    Thanked: 11

    Default

    I'll try lapping the hell out of it then. Should it have a similar feel in use to the 8k side,or is the 4k a whole different animal?
    Thanks for the tip.

    Connor

  5. #5
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    Not as glassy smooth as the 8K side, but smooth. You should not be able to feel the grainy feeling like you do now.

    Lynn

  6. The Following User Says Thank You to Lynn For This Useful Post:

    JimmyHAD (02-23-2009)

  7. #6
    ---
    Join Date
    Jan 2009
    Posts
    1,230
    Thanked: 278

    Default

    Silly question (maybe) ... are you soaking the Norton for 15 minutes+ before using the 4K side? You need to. The 8K side can do without the soaking.

  8. #7
    Member
    Join Date
    Sep 2007
    Location
    Manchester, UK
    Posts
    95
    Thanked: 11

    Default

    Quote Originally Posted by Lynn View Post
    Not as glassy smooth as the 8K side, but smooth. You should not be able to feel the grainy feeling like you do now.

    Lynn
    That's what I thought.
    Yes I give it agood soaking before use.
    My arm hurts.

    Connor

  9. #8
    Senior Member
    Join Date
    Feb 2008
    Posts
    1,588
    Thanked: 286

    Default

    I have norton 4k 8k and after i lapped mine with dmtc my 4k was a lot smoother for sure. I now use my bbw stone instead of my norton with light slurry which you will like as it has a great feeling and they are cheap to buy then i move onto yellow with water and a bit of soapy water i meant to say which makes honing easier and i get smoother and i would say sharper shaving razor than i have ever got from norton even though i do drop down to my norton some times but still finish with bbw yellow and then .5 chr and i get great shaves if i don't first time round you can repeat with your belgiums with out over honing it is very hard to over hone with belgiums i have done 2 / 3 hundred passes and never over honed. try it!

  10. #9
    Coticule researcher
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,872
    Thanked: 1212

    Default

    You have everything you need.

    Start out on your Coticule with slurry. If the slurry starts to turn grayish from steel particles entering, after 20 strokes, it's a fast enough cutter to tackle most bevel issues on a dull razor.
    Once the keenness maxes out on slurry (the razor should shave arm hair with great ease), jump straight to the Norton 8K, for about 30 strokes. Finish on the Coticule with water, but add a drop of dishwashing soap to it.

    Just one of your options, omitting the 4K.

    Bart.

  11. #10
    Member
    Join Date
    Sep 2007
    Location
    Manchester, UK
    Posts
    95
    Thanked: 11

    Default

    That's the cheapest new hone ever! It feels like I expected it to now, and is much nicer to hone on. As promised, the results seem better too, but I haven't shaved with it yet.
    I did notice something interesting when lapping the Norton down. I tested it twice during the lapping by running a razor across it to see what it felt like, but when I had taken enough of the surface off I could definately feel the difference ON THE LAPPING PLATE!!! The Norton now felt like I was lapping it on sandpaper instead of a concrete block (I was actually using a DMT D8C). I washed the stone off, and sure enough it felt much better with a razor. I had taken just under an 1/8th of an inch off the stone.

    Bart, my coticule is indeed a fast cutter and you can notice the slurry turning greyish after about 15 strokes, but it is a bit short for major bevel work (It's 1.2"x5"), and I would like longer hone. Are there any 1k hones with a nice feel? I would probably still use the coticule to finish off the bevel and for blades which don't need so much work. I'm interested in your idea of going from the coticule with slurry straight to the 8k. I would of expected it to take a lot more work on the 8k than you suggest. I'll have to try that.

    Connor

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •