Thread: Norton honing vid

I've been posting this guys vid all over the place, but those were the forums where it was relevant. In this one he shows honing on the 3" Norton stone.

http://www.current.tv/studio/media/1036918

Btw. the guy has seen Lynn's video, so he could even be a member. If these vids have been here before, please accept my apologies. I just wanted to contribute

He's a member here and posted those about 56 months back. Good to watch aren't they?

X

Certainly. Which gives me an idea. If people from this forum got together and developed a comprehensive instructional vid on antiques, new razors, restoration, honing, stropping and shaving, published a written manual along with it and made'em freeware, it would do a lot to further spread the trend.

They really were good videos. I don't hone mine the same way he does, but the face preparation part was outstanding.

Due to the size of my hone (2") I'm forced to use the X-pattern. If we did a comprehensive vid, a how-to on that would also be useful to the general public.

I cant get the video to open. all I get is a red "X"

Which browser are you using?
I used Opera and I'm pretty sure it will open on IE/NS/FF. Check your browser security settings and your firewall settings. Actually, If I were a betting man, I'd bet a pint of Smithwicks that it will play once you bypass the firewall.

Brian has really tried to contribute to this hobby of ours and I thank him for his efforts.

One of the things he does that I feel is in error is to lap the hone with some sandpaper and his fingers. The purpose of lapping is to "flatten" the stone. For that you need a flat surface. Using a pumice stone or old razor hone that is as wide as the Norton is one of the correct metrhods. But using your fingers is not. That is only good for removing built up "swarf".

Brian also is using a straight across "push" stroke. Many of us disagree with that and instead use either an X pattern or have the toe of the blade angled back (heel leading). Both the X pattern and the heel leading stroke create a scratch pattern (striations) that is angled and gives a better shave.

I also take strong issue with putting your fingers on the blade. This results in an uneven wear on the bevel/blade. Your best bet is to learn to use one hand with the fingers on the shank(as a fulcrum) and use your other fingers as a lever on the scales.

Just had to comment,

And it's appreciated... The video is just a starting point for a discussion on the topic, especially since he does it differently than what is the general concensus here.

Edit: His way of checking for sharpness is also unorthodox.

Originally Posted by randydance062449

I also take strong issue with putting your fingers on the blade. This results in an uneven wear on the bevel/blade. Your best bet is to learn to use one hand with the fingers on the shank(as a fulcrum) and use your other fingers as a lever on the scales.

Just had to comment,

Now that is interesting . . . your pulling up with the fingers on the scale? Slightly ofcourse.