Results 1 to 4 of 4
Like Tree2Likes
  • 1 Post By Lynn
  • 1 Post By nun2sharp

Thread: (almost) Successful Honing My First Two Razors!

  1. #1
    Junior Member ThrownClear's Avatar
    Join Date
    Sep 2011
    Posts
    14
    Thanked: 1

    Default (almost) Successful Honing My First Two Razors!

    Hey all,

    I spent many hours on my new, freshly-lapped, Nortons this weekend. First of all, I'm amazed at how quick improvement can come. I was using two hands for awhile because I just couldn't keep the blade flat on the hone one-handed. Using the pinky to adjust height was useless - I had no touch at all, it was either too far up or too far down and I just couldn't find a middle ground. Then I slowed waaayyy down, made sure my strokes were as close to perfect as I could get them, and before too long (and a couple of breaks to calm down and let my muscles re-set) I was seeing vast improvements. Happy times.

    Here are the problems I still need help with -

    I went ahead and shaved with three razors today, the two I had honed and my "shave ready" razor honed by Larry over at Whipped Dog. My two razors did cut, but were just a little rougher than Larry's.

    I've read plenty of threads about how inaccurate and misleading the HHT can be, but my "shave ready" razor will easily mow down the "treetops" of my arm hairs, and I see gssixgun getting those results as soon as the bevel is set, and I just can't get my newly-honed razors to do it.

    I *can* pass the HHT after progressing past the 8k and then stropping with CrOx and leather, but only in the center of the blade (which is most likely a problem with my stroke missing the heel and toe).

    any advice on; A: getting my razors smoother, B: passing HHT at the 1k or 4k level, and C: sharpening up the heels and toes?

  2. #2
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    for smoothness off the 8k Norton , you need to either lighten up the pressure while honing on the stone, or add more laps to get the max out of it.
    You might need to add more laps on CrO to get that 8k edge as smooth as possible.
    Stefan

  3. #3
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    Sounds like you have already done the best sharpness test, which is shaving which told you that the razors were not quite there, but close. As Stefan indicated, pressure could be an issue. You might try 3-5 no pressure X strokes back on the 8K and the strop and re-test to see what the results are. You really should not need more than 10 light strokes on the chromium oxide.

    Have fun
    Havachat45 likes this.

  4. #4
    what Dad calls me nun2sharp's Avatar
    Join Date
    Feb 2008
    Location
    Kansas city area USA
    Posts
    9,172
    Thanked: 1677

    Default

    You have already learned to slow down and take your time, speed is unnecessary, you say that the center of the blade is sharp but not the heel or toe, check for a warp and if this is not a problem then work on keeping the blade perfectly flat, go slow and watch every stroke you make, this way you can see where you need to correct yourself.

    I used to find any post by Randydance I could find and watch his avatar while I was learning to hone, it will help you to develop the perfect stroke.
    Havachat45 likes this.
    It is easier to fool people than to convince them they have been fooled. Twain

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •