Results 1 to 8 of 8
-
02-02-2012, 01:46 AM #1
- Join Date
- Sep 2010
- Location
- Calgary, Alberta
- Posts
- 160
Thanked: 20.5 micron lapping film: stick to tile?
I have some 0.5 micron lapping film.The film doesn't have adhesive I want to stick this to a granite tile for maintaning a razor. What would be the best way to do this?
Thanks
-
02-02-2012, 02:47 AM #2
-
The Following User Says Thank You to niftyshaving For This Useful Post:
binder (02-02-2012)
-
02-02-2012, 05:06 AM #3
- Join Date
- Jan 2008
- Location
- Northern California
- Posts
- 1,301
Thanked: 267+1, When I was using films a lot, water was all that was needed.
Later,
R
-
The Following User Says Thank You to riooso For This Useful Post:
Kingfish (02-02-2012)
-
02-02-2012, 05:37 PM #4
- Join Date
- Sep 2010
- Location
- Calgary, Alberta
- Posts
- 160
Thanked: 2Thanks for the response.
I thought the film would curl or lift in time. I guess I would have to stick it down each time I use it.
-
02-03-2012, 04:48 AM #5
- Join Date
- Jan 2008
- Location
- Northern California
- Posts
- 1,301
Thanked: 267Sorry sometimes we don't spell out how we do things. I wet the tile and make sure that it is very clean with no dust particles in the water....nada...nothing! I then put down the film and use a credit card, for instance, and then squeegee the water out from under the film. I do this every time I use any particular film. I then put a small bit of water back on top of the film for honing purposes. I use about 3 films if I am honing with them so I just peel off the last one I used and wash the tile down and add the new film that I am going to be using. I find bottled water with a drop of dish soap the best solution for films. Hope I did not over do it...I usually do!
Take Care,
Richard
-
The Following 2 Users Say Thank You to riooso For This Useful Post:
binder (02-03-2012), niftyshaving (02-03-2012)
-
02-03-2012, 08:14 AM #6
The imperial lapping film from 3M consists of abrasive particles bonded to a highly durable plastic film. This is unlike the usual w/d sandpaper stuff, wich actually has some kind of paper as backing.
So no matter how wet you make the 3M stuff it won´t curl or soak and stay in shape
-
The Following User Says Thank You to Lesslemming For This Useful Post:
binder (02-04-2012)
-
02-04-2012, 08:05 AM #7
- Join Date
- Sep 2010
- Location
- Calgary, Alberta
- Posts
- 160
Thanked: 2I was reading a thread: 'Why lapping film rules'. I am interested in the sheet of paper that Seraphim uses under the lapping film to get a smoother bevel. Will using the paper round the edge or can I use this to maintain the bevel on a razor?
ThanksLast edited by binder; 02-04-2012 at 08:08 AM.
-
02-04-2012, 09:40 AM #8
unfortunately I know nothing about this "cushion" Seraphim used, other than he did not seem to have used it again. Maybe you contact him over at B&B and tell us what you can find out