Not saying much other than look at my hones!
Attachment 119841
Shapton Glass Stones in 220, 500, 1000, 2000, 4000, 8000
And Atoma diamond plates in 400, 1200
I've got the gear now to start learning, wish me luck...
Printable View
Not saying much other than look at my hones!
Attachment 119841
Shapton Glass Stones in 220, 500, 1000, 2000, 4000, 8000
And Atoma diamond plates in 400, 1200
I've got the gear now to start learning, wish me luck...
you have all off the stuff needed to do the job, good luck. and nice set :)
And now you can't even blame your tools:gl:
Where's the sweet 16?
I'm probably the biggest advocate for the Shapton GS's here at SRP. Only time I use the 220 or 500 is for razor repairs, but they are great for knives. After a light lapping, I would only use the 1200 Atoma to keep them flat. Keep your spray bottle handy as they like to run wet.
If I can be of assistance, please don't hesitate to PM me as I still mostly use my GS's.
By the way...NICE way to start out honing!
I use the Shapton GS stones almost exclusively. I'd also recommend not using the plates to create slurry. It's not needed on the Shaptons. You'll just be wasting good stone. Water alone is fine, They are fast cutters. Faster than you'd think, so remember, less is more. If you find yourself doing hundreds of laps, somethings wrong.
PM Shooter immediately......:rofl2: and he's right..Get the 16. You'll be glad you did. By the time I get to that stone, I find I only need 5-10 laps depending on the blade. It's easy to go to far on the 16, which will make the edge feel harsh. Eventually, you'll be able to feel it.
Good choice btw, Congrats!
Thanks for the encouragement.
Spent a morning with Oz and he conveniently had the Shaptons sitting there unused as he went the the Pros, got them for a good price, and they were pretty much lapped as a bonus.
The Atomas were bought solely with the intent of lapping so don't worry about stone being wasted on slurry.
I've currently got a Gotta on the stones with a somewhat uneven bevel and a chip near the toe that won't go. But will get there eventually I'm sure.
Edit: a higher grit stone be it a Shapton or natural is on the cards but not until I can do these stones justice!!
I'm a bit of a lurker around here but have the full set of Shaptons and love them. Don't hesitate to ask questions..
good luck in your venture ...
Wow...and I thought about starting out with a norton 4/8k....
You are set!