Big Texas Introduction

Greeting, I decided I'd introduce myself. My name is Brian and I like in the great state of Texas. I've been shaving with a DE razor for about 2 years. Prior to that I was ruining my face with an electric razor. I've always been fascinated with older technology, I still shoot films and have a darkroom in my house. I've always wanted to try and shave with a straight razor. About 4 weeks ago I bought a strop and a restored razor. The first shave was okay but a couple or nicks and some razor burn. No problem as I really liked the overall experience. Unfortunately with my 6th shave I wasn't being careful and dropped the razor in the sink. And yes I now have 2 small chips in the blade. No worries as I will get it honed. I didn't have a backup so I bought a decent one on another forum that was shave ready. This razor was very comfortable compared to the first one and I liked the fact is was a 6/8 compared to a 5/8. Well as luck would have it I wasn't paying attention and relaxed my hand and sliced the side of my face. Not a deep cut but it really bleed. Trying to deal with the blood I put my razor in the cabinet not closing it all the way as it was still a little wet and it fell into the sink. Ugh! A little chip on the blade but enough to make a mark on the strop. So now I have 2 razors that need to be honed and I'm currently back to shaving with a DE. I'm not sure SE shaving is for me but I'm not giving up just yet. I realized I need to be more careful with the razor as it is a delicate piece of equipment. Once the razors are honed and working again hopefully I can continue to enjoy shaving with them.

As they say, "____ happens!" Welcome to THE Forum/fountain of knowledge. You list San Antonio as home base. Rupp Razors are in your town. You are also close to Houston where Sharptonn resides. He has good, frequent meet ups that pull shavers from all over the area. And I hope you are making use of the SRP Library, or at least going through the FAQs that have links to more complete sections.

You got there before me Richard, i was going to suggest sharptonn as well. Welcome to the forum Brian, i am pretty sure we can get you on track.

Welcome aboard

It will get better. You seem to have had a rough go so far.

Welcome to SRP!
Sounds like a rough start, but don't give up. The only beginner mistake you have left to accomplish is to slash the strop up. :)
It does get better and something like Neosporin will speed the healing of the cut.
As mentioned above, sharptonn can bring you up to speed.
Good luck.

Hi and welcome. A couple of rookie mistakes but we all make a couple it just helps to keep us on the ball. Good luck and any questions feel free to ask.

Thanks everyone for the vote of confidence. I know it will get better. I wasn't aware of anyone in San Antonio to hone the razor. That is great information, thanks!

Welcome to you from the great state of Texas. Lone star beer tastes bad BUT sovereign. Your on the front.

Hi & welcome to the forum. I'm very sorry about your bad luck with the two razors you reentry acquired but don't let it get you down & don't give up, shit happens! Next time, try to be careful & not have slippery fingers & try not to drop your razors. It's a good thing you didn't go to one of the vendors & buy yourself a new razor. If it weren't for the drains & faucets, we wouldn't have such a problem with them. Let me say this. If you have learned your lesson, go back to where you purchased the last one & try to find another one that is shave ready but keep in mind that many people say they are shave ready but if you go to the classifieds here & see one that says shave ready, chances are it is. Also there are vendors on here that do honing & you can send the other two out as long as they aren't too bad & have them honed for an affordable price. Usually when I make a mistake it is the only time it will happen & I will make sure it doesn't happen again but like I said, things do happen. Just make sure you alway dry your hands off & wash all soap off & it will likely not happen again. So now you have chipped two razors & sliced your face. I hope that doesn't leave a scar. Go to the Library & read the br=einners section & then learn to strop if you really don't know how to yet. Meanwhile you are sending your damaged razors out to be repaired as long as that can be done. Hopefully they are small chips & you'll come out smelling like a rose. Life sucks sometimes but it won't always be that way. You did the right thing buy buying spare but unfortunately it didn't work out that way but in the future I hope your luck changes for the better. Hang in there & good luck with straight shaving, you'll get there! Stay cool & be careful & everything will be ok. Let us know how it goes. We're here for you & if you have any questions, please don't hesitate to ask. It never hurts to ask.
Steve

I am new to this SE gig as well and luckily I haven't damaged my razor yet (but who knows). I have made other mistakes that have set me back here and there. A careless slice down the cheek, a gash over the lip, and the odd nick here and there mostly due to shaving when I should be sleeping. I have a crazy schedule and bounce between nights and days a couple times each week. Stick it out it does get better. Just wanted to give you a welcome since I live just down the road a piece (Seguin TX). I hope to find someone local to help me a bit once I need my razor honed (doing well still) and again when I start honing myself. For now welcome and best of luck

Quote:

---

Originally Posted by brbeck

Thanks everyone for the vote of confidence. I know it will get better. I wasn't aware of anyone in San Antonio to hone the razor. That is great information, thanks!

---

Look Ken up: www.ruprazor.com

I'm going to post this every time I see the following: SE. Lets get our abbreviations correct. SE usually means Single Edge Safety Razor. DE usually means Double Edge Safety Razor. If we don't use Straight Razor in long form, for convenience and definitely clarity can we all use SR as the abbreviation for Straight Razor? There have been a number of variations, example: Stra8, ST8 and the long winded, A piece of hell spawned steel for scraping away your face.

It looks like ruprazor.com is down. Does he have a presence on this site?

Quote:

---

Originally Posted by Razorfeld

I'm going to post this every time I see the following: SE. Lets get our abbreviations correct. SE usually means Single Edge Safety Razor. DE usually means Double Edge Safety Razor. If we don't use Straight Razor in long form, for convenience and definitely clarity can we all use SR as the abbreviation for Straight Razor? There have been a number of variations, example: Stra8, ST8 and the long winded, A piece of hell spawned steel for scraping away your face.

---

Oops sorry didn't mean to get your shorts riding up. Will remember it in the future;-)

Quote:

---

Originally Posted by Razorfeld

I'm going to post this every time I see the following: SE. Lets get our abbreviations correct. SE usually means Single Edge Safety Razor. DE usually means Double Edge Safety Razor. If we don't use Straight Razor in long form, for convenience and definitely clarity can we all use SR as the abbreviation for Straight Razor? There have been a number of variations, example: Stra8, ST8 and the long winded, A piece of hell spawned steel for scraping away your face.

---

I suspect that you are going to be fairly busy Richard, but you are right, getting our abbreviations etc right makes everyone's life easier. flatyre, don't get upset you are by no means the first to do that.

Didn't get my shorts in a bind. Just being exact about terminology to keep things from getting cloudy and misunderstood in the future.:rock:

Quote:

---

Originally Posted by edhewitt

I suspect that you are going to be fairly busy Richard, but you are right, getting our abbreviations etc right makes everyone's life easier. flatyre, don't get upset you are by no means the first to do that.

---

I'm not upset. Just getting fussy in my old age. Clarity is essential to good communications. Didn't mean to sound like an old English teacher with a whip in hand.

If you sent a message to Ken Rup, he will get back with you. I am pretty sure he's not at the computer all day every day, but he will get back with you with any questions. He's also a member here...

Quote:

---

Originally Posted by edhewitt

I suspect that you are going to be fairly busy Richard, but you are right, getting our abbreviations etc right makes everyone's life easier. flatyre, don't get upset you are by no means the first to do that.

---

Not upset, not even a little. Was just acknowledging the correction. No worries for sure