Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree15Likes

Thread: 42yo newbie making the switch!

  1. #1
    Junior Member
    Join Date
    Nov 2014
    Location
    Whitehouse, Ohio
    Posts
    13
    Thanked: 1

    Default 42yo newbie making the switch!

    Hello to all! My name is Matt and I live in Ohio. I'm making the switch to cutthroat because I've owned my grandfather's SHUMATE #850 since 1990. And I want to use it! It has been too long for me not to put a blade that has so much sentimental value to work. I Have always enjoyed the ritual of shaving and have used a DE for years but I have done nothing with this straight razor but look and admire it and put a little oil on it from time to time. But today I sent it to Straight Razor Designs to have it honed, so it can live again. Thanks to this site and the knowledge you all have to offer I cannot wait to get started. I'm confident that any problems or questions I have will be met with expirenced answers and explanations. I'm not sure how good the vintage SHUMATE #850 is to shave with but unless you guys tell me I'm crazy for using it, that will be my blade of choice. Looking forward to being part of SRP and thank you for having me!

  2. #2
    Senior Member blabbermouth Haroldg48's Avatar
    Join Date
    Jun 2013
    Location
    Clayton, NC USA
    Posts
    3,341
    Thanked: 866

    Default

    Welcome, and congrats on the decision to send it to SRD, it will be ready for your face get you get it back!
    Just call me Harold
    ---------------------------
    A bad day at the beach is better than a good day at work!

  3. The Following User Says Thank You to Haroldg48 For This Useful Post:

    millbilly (11-23-2014)

  4. #3
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,544
    Thanked: 3795
    Blog Entries
    1

    Default

    You ARE crazy to use it.

    As a family heirloom, you should not learn with this razor. It is a frequent occurrence for beginners to destroy their razors. They actually are fairly fragile and one simple mistake can break that blade.

    You SHOULD use that razor, just not now. I suggest that you buy another quality razor and learn how to use it instead. Only after you have a few months of shaving done should you begin to use your grandfather's razor.

    Also, Shumates are great razors!
    Geezer, JimBC, Baxxer and 3 others like this.

  5. The Following User Says Thank You to Utopian For This Useful Post:

    millbilly (11-23-2014)

  6. #4
    Junior Member
    Join Date
    Nov 2014
    Location
    Whitehouse, Ohio
    Posts
    13
    Thanked: 1

    Default

    You make a great point! I would be devastated if I ruined it. It gives me great memories just to even look at it. My grandparents came from Germany and this razor was one of the first things he had ever gotten when they homesteaded in Nebraska! Would you have a suggestion for a beginning razor? Thanks for the great advice!

  7. #5
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,395
    Thanked: 4821

    Default

    Welcome. There is nothing better than an heirloom razor. Enjoy and protect it.
    It's not what you know, it's who you take fishing!

  8. The Following User Says Thank You to RezDog For This Useful Post:

    millbilly (11-23-2014)

  9. #6
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,544
    Thanked: 3795
    Blog Entries
    1

    Default

    Check the classifieds. You might be best served finding another razor similar in size and grind to your grandfather's.

    You can also check Straight Razor Designs for a new razor. I really like the quality of the Ralph Aust razors but you can also get a low end Dovo.

  10. The Following User Says Thank You to Utopian For This Useful Post:

    millbilly (11-23-2014)

  11. #7
    Senior Member criswilson10's Avatar
    Join Date
    May 2014
    Location
    Easley, SC, USA
    Posts
    1,861
    Thanked: 480

    Default

    Welcome to SRP!
    Shumates are great razors. With a hone from SRD, it will go through hair like butter and give you a nice smooth shave.

    I'll second the "don't shave with it yet". When you are learning it is easy to ding the razor on the sink, the faucet, the counter top, etc. If you don't want to spend the money on a new razor, you can get one from the classifieds or whippeddog.com. The whipped dog ones may not be pretty, but they are low cost and good shavers.

    Make sure you check out the Beginners Section in the Library and start practicing stropping on your leg with a butter knife.
    Some people never go crazy. What truly horrible lives they must lead - Charles Bukowski

  12. The Following User Says Thank You to criswilson10 For This Useful Post:

    millbilly (11-23-2014)

  13. #8
    Senior Member blabbermouth engine46's Avatar
    Join Date
    Feb 2014
    Location
    Republic of Texas
    Posts
    7,810
    Thanked: 1744
    Blog Entries
    2

    Default

    Welcome to SRP Matt. It will be a pleasure to have you here as we are all sick with RAD, Razor Acquisition Disorder. I just got finished helping another new member out getting his first straight from eBay, a Red Imperial that is mint. The Shumate is a great razor & you'll love it when you get it back from Lynn, the forum founder who also does the honing at SRD. Lynn's a great guy & an awesome person to learn from. I've learned a lot from him through his dvd & just through emails. You might want to get a second razor for when you don't want to use the family heirloom all the time plus when you need to send it out for honing, you will need another one for the time being. That is where RAD comes in because some of use can't own enough straight razors! There's so much information to learn if you go to the Library here. It all starts here:
    Straight Razor Place Library - Straight Razor Place Library
    You'll start with the beginners & work your way around in there. Play around & check it out!
    You'll also want to know this one too:
    http://straightrazorpalace.com/works...wers-here.html
    Here are razors not to buy:
    Brands of Straight Razors to Avoid - Straight Razor Place Library
    There is much more you can learn by exploring the site. Enjoy & have fun!
    Last edited by engine46; 11-23-2014 at 09:02 AM.

  14. The Following User Says Thank You to engine46 For This Useful Post:

    millbilly (11-23-2014)

  15. #9
    MJC
    MJC is offline
    Senior Member MJC's Avatar
    Join Date
    May 2012
    Location
    The Lone Star State
    Posts
    1,710
    Thanked: 382

    Default

    Welcome to SRP and our little global family.

    As one who has the honor of custody of two of my Grandfathers razors I second the comments about "learn with something else"

    Far to often we get the "I dropped/dinked on the faucet/left it wet/insert name of disaster here" to their razor.

    You don't realy own the Shumate, you are the Guardian. It should be cared for and used, as this honors its intent and connects you to your Grandfather. But it must be ready to pass on to the next generation, hopefully to someone whom you have mentored in its use and care.

    I've started my younger Brother down the path of shaving with a Straight, partly to be able to pass on one of Grandpa's straights to him, for one of his Grandsons.

    Smooth shaving...
    engine46 likes this.
    Support Movember!
    Movember https://mobro.co/markcastellana?mc=1
    SRP Team USA https://moteam.co/srp-usa?mc=1

  16. The Following User Says Thank You to MJC For This Useful Post:

    millbilly (11-23-2014)

  17. #10
    Senior Member Baxxer's Avatar
    Join Date
    Sep 2011
    Location
    stockholm,sweden
    Posts
    567
    Thanked: 100

    Default

    Quote Originally Posted by Utopian View Post
    You ARE crazy to use it.

    As a family heirloom, you should not learn with this razor. It is a frequent occurrence for beginners to destroy their razors. They actually are fairly fragile and one simple mistake can break that blade.

    You SHOULD use that razor, just not now. I suggest that you buy another quality razor and learn how to use it instead. Only after you have a few months of shaving done should you begin to use your grandfather's razor.

    Also, Shumates are great razors!
    Fully agreed, I've actually managed to never actually ruin a razor but I really wish that I'd gotten a lot more honing practice with some less fancy razors before I started honing my first razor, a NOS(When I bought it) Heljestrand MK42, it now has slightly uneven hone wear and a slight(almost unnoticeable unless you take a close look at it) taper towards the toe because I used to hone with a finger on the spine when I started out.
    Last edited by Baxxer; 11-23-2014 at 02:06 PM.

  18. The Following User Says Thank You to Baxxer For This Useful Post:

    millbilly (11-23-2014)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •