New Member from Hartford, Ct area

Hi , I have been gifted a straight razor which needs a decent amount of tlc ( It has some surface rust and possible pitting.) I have never used a straight razor but looking forward to it. I will be delving through the forums to find the best way to rejuvenate this razor. The blade is Manufactured by, D C Halsted, Shefield. The scales appear to be yellow horn ( I have done a little reading so far.) They have etched in them " The Old English Razor" I would gladly upload a picture but unsure how to host it etc. Looking forward to restoring and using it. Hope to share my journey in pictures etc.

Welcome aboard.
Please...do educate yourself fully, if you've never done it. Its very essential that you do.

There's information in our library, videos can be viewed on YouTube, and tons upon tons of info in the work shop.
Ask for help, well be along shortly.

Above all...have fun.

Welcome. I think when i signed up you had to have a few post before being able to post a pic. Love to see the razor.

Great to have you, as stated read, read, read. Then ask questions, this hobby can take very few tools and lots of patience. Great rewards after you get one done though. Best of luck, swing into the workshop and check out all the work going on. Lots to learn there and the library.

This is it. Would like to restore to shaving condition.https://uploads.tapatalk-cdn.com/201...9c2ad9b3e3.jpg

Sent from my LGLS992 using Tapatalk

That looks like a nice one.
Maybe try some wire wool and WD40 to remove the rust and see what lies beneath.

Could be that's all it needs depending on what you want to achieve.

Sharpening would require some one with experience, there are many here.

Welcome to the forum and to the rabbit hole of straights.

That is a good looking razor and you can't go wrong with Sheffield steel.

I think at this point you should ask yourself what your priority is. By that I mean do you want to shave or do you want to restore it? Maybe you want to do both, but it might be a lot to take in at the beginning. It might be worth having the razor restored and made shave ready by someone with the experience and the equipment required. Then once you have got into the hobby of shaving look round for some old razors to have a crack at restoration.

Whatever you decide, I think that this will be a fine razor to have in any collection.

Take your time and enjoy!

Welcome to SRP.
Yep, as was stated, start with some steal wool and wd-40 or metal polish and spend a couple hours cleaning. Being careful of the edge. You will find that a dull razor is as sharp as a knife the hard way and thats no fun.
A proper honing, not done by yourself is best when starting out. This way any issues you have with shaving will not be the blade. You will need a strop but dont spend a lot as you will cut it up. It just happens when your new to this hobby.

Read as much as possible in the library and watch some vids to learn basics. And take you time. Slow and easy. Enjoy the ride.

Welcome to the forum. :)

Hello and welcome to SRP.
Enjoy your time here on the forum and have fun.

Pete <:-}

Thinking I may save up to have this one restored or wait till I have learned more to attempt it myself.
I will keep my eye on razor selling forum and see if I can find a ready to shave razor I can afford, and learn with it.

Sent from my LGLS992 using Tapatalk

Welcome to the forum! That blade should clean up nicely. Meanwhile, B/S/T is a great place to find a shave ready razor at a fair price. Good luck with the hunt. :)

Thank you everyone. I feel very welcomed.

Sent from my LGLS992 using Tapatalk

Hi and welcome aboard. If looking for another razor go to the bst. You will get a shave ready razor not like ebay where you will be lucky to find someone who knows what shave ready is. If restoring yourself go slow. Its easy to do damage harder to fix. Good luck and any questions feel free to ask

Welcome to SRP!!

As you've seen, a lot of great folks here and tons of info.
Great razor there, and good call waiting or sending it off to be done.

Enjoy and have fun!!

That looks like one fun little project. Have fun and welcome to SRP!

I have ordered a razor from BST ( 9/16 H. Krawetzke, Fremont OH (Clauss Razor Co.)). Looking forward to experimenting/shaving with it!

Quote:

---

Originally Posted by eastratton

I have ordered a razor from BST ( 9/16 H. Krawetzke, Fremont OH (Clauss Razor Co.)). Looking forward to experimenting/shaving with it!

---

You'll like the shave. I've got a few Clauss razors...no complaints.!