Four Blades for Restoration - ERN, Hoshi Tombo, Joseph Rodgers, Joseph Elliot
Hi SRP!
Here are some blades from my collection that I began to restore but was unable to complete. Unfortunately I don't have the time to complete these now so they're up for grabs for any amateur or professional restorers out there who can get these over the line and back into shaving shape.
All of the blades are from well regarded makers and have been partially restored, some to the point where they could be scaled and honed immediately.
The sale is for:
1. Hoshi Tombo 6000 - Asymmetrically ground Japanese razor with a very nice 2" long 6/8" wide blade. some remnants of historic rust remain and the blade faces need further sanding through the grits to bring back the mirror shine. Geometry is good and the bevel is an even width when checked with a pass over a hone.
2. ERN Solingen 'Dreadnought' - This ERN measures 13/16" wide and has an awesome shoulderless grind and notched square point. I hand sanded and polished this blade to the point where I was ready to make scales for it. I kept the sanding to the minimum to preserve the blade etch, so some pitting and spidery rust remnants remain. No active rust of course. The geometry on this is very good as there was minimal historic hone wear.
3. Joseph Rodgers Notched Point - This big Sheffield blade has a 3" plus long blade that is 6/8" wide. It is likely a historic regrind from an earlier heavy wedge razor. The razor is now a well executed 1/2 hollow. When checked with a stroke on the hone it has a very even and small bevel so I'm sure the geometry is good and able to take an edge (YMMV as always). Hand sanded to a nice high polish with some old rust and age marks left.
4. Joseph Elliot Square Point - A 2.5" long hollow ground blade with a 5/8" - 6/8" wide blade. This razor has been hand sanded to a nice high polish without removing the deepest historic marks to preserve the geometry. This blade came in a pair of broken horn scales that were much longer than the blade, so if original the blade is likely another historic (i.e. done during the early life of the razor - not recent) regrind from an earlier larger wedge. The edge sits nice and flat on the hone so the geometry looks sound.
Hopefully the descriptions above are adequate - please let me know if you would like any more information about the blades.
I would prefer to sell them all together as logistically is isn't sensible to post each blade separately as postage costs from New Zealand (where I am located) are high when posting internationally.
As such, I have priced the lot to move at $SOLD, which is much less that I paid to collect them all by a significant amount. Finish them and you'll easily get the money back or at the very least have four neat razors to add to your collection!
Standard shipping (Approx $10.00 USD value) is included. This NON tracked method takes 7-21 working days on average to the USA (for example). Tracked postage is available when using international courier post, but this is an additional $20.00 USD (dearer in reality but I will subsidize the cost if the buyer requires tracking). If you are also in New Zealand please contact me for local rates.
Payment via. PayPal please.
I am a long time forum member with many successful trades in the past so buy with confidence.
Thanks for looking!
Matt.
https://i.imgur.com/kDAU2pT.jpg
https://i.imgur.com/YyfAMzi.jpg
https://i.imgur.com/ABqZ9n0.jpg
https://i.imgur.com/CgWm6gK.jpg
https://i.imgur.com/jfapuME.jpg
https://i.imgur.com/HSFSOJJ.jpg
https://i.imgur.com/BeF4FBT.jpg
