Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree13Likes

Thread: Flea Market hints and tips

  1. #1
    Senior Member Damo's Avatar
    Join Date
    May 2013
    Location
    London, UK
    Posts
    453
    Thanked: 54

    Talking Flea Market hints and tips

    Hello there,

    I am finishing up some exams tomorrow, and decided the best way to spend my time (after the pub) was to go and walk in the sun around some flea/antiques markets!

    However, as a newb, I wondered if someone could tell me a few hints and tips for the road. For instance, I am guessing that a rusty things or rust close to the edge is a nono, but what are the other red flags to look for on a razor? I appreciate that there was a thread about this on ebay purchases, but wondered if someone could tell me the things to look for when you are actually holding it in your hand at the stall?

    Many thanks!

  2. #2
    Historically Inquisitive Martin103's Avatar
    Join Date
    Aug 2011
    Location
    Upstate New York
    Posts
    5,780
    Thanked: 4249
    Blog Entries
    1

    Default

    With having the razor in your hand you could look for, cracks on the blade, movement of the blade within the scales, hone wear, you could put the razor on a flat surface to see any warping, hidden rust mostly around the pivot pin, pitting close to the edge. That said my best advise would be if any doubt just walk away there will be plenty more.
    Last edited by Martin103; 07-31-2013 at 04:04 PM.

  3. The Following User Says Thank You to Martin103 For This Useful Post:

    Damo (07-31-2013)

  4. #3
    Senior Member blabbermouth Leatherstockiings's Avatar
    Join Date
    Apr 2013
    Location
    Rural Missouri
    Posts
    4,981
    Thanked: 972

    Default

    If the lighting is bad ask to look at the razor in better light. I made a recent purchase at an antique store. I moved to the front of the store and looked at the razor next to the window. That way I was able to check for any fine cracks or chips in the blade.

    If you are not sure about a razor you are looking(make, location of manufacture) at pass. You can later get online and check it out in the Razor database here in the library section.

  5. #4
    Historically Inquisitive Martin103's Avatar
    Join Date
    Aug 2011
    Location
    Upstate New York
    Posts
    5,780
    Thanked: 4249
    Blog Entries
    1

    Default

    Quote Originally Posted by Leatherstockiings View Post
    If the lighting is bad ask to look at the razor in better light. I made a recent purchase at an antique store. I moved to the front of the store and looked at the razor next to the window. That way I was able to check for any fine cracks or chips in the blade.
    That a real good tip to look under better light or even better sunlight to inspect the blade. And on more negociate the price, make a low ball offer and go from there, its not like there a line of people waiting to buy straight razors.
    Last edited by Martin103; 07-31-2013 at 04:46 PM.

  6. #5
    Senior Member Damo's Avatar
    Join Date
    May 2013
    Location
    London, UK
    Posts
    453
    Thanked: 54

    Default

    Quote Originally Posted by Leatherstockiings View Post
    If the lighting is bad ask to look at the razor in better light. I made a recent purchase at an antique store. I moved to the front of the store and looked at the razor next to the window. That way I was able to check for any fine cracks or chips in the blade.

    If you are not sure about a razor you are looking(make, location of manufacture) at pass. You can later get online and check it out in the Razor database here in the library section.

    Thanks very much - so would you be able to see all of the irreparable chips to the edge? Or is it worth taking along a jewellers magnifier or similar to examine it?

  7. #6
    Fatty Boom Boom WW243's Avatar
    Join Date
    Jul 2012
    Location
    Rockville
    Posts
    3,258
    Thanked: 638

    Default

    My advice would be to spend as much time as possible looking into this forum. The depth of knowledge here is pretty astounding and many experienced members are willing to help someone starting out. But, again, don't bypass what has already been written. Next, get a good camera.
    "Call me Ishmael"
    CUTS LANE WOOL HAIR LIKE A Saus-AGE!

  8. #7
    Senior Member Damo's Avatar
    Join Date
    May 2013
    Location
    London, UK
    Posts
    453
    Thanked: 54

    Default

    hah, the never ending learning cycle.....next skill to learn would appear to be how to take adequate pictures of razors! SOTD is always impressive

  9. #8
    Senior Member crouton976's Avatar
    Join Date
    Mar 2013
    Location
    Metro Atlanta, GA
    Posts
    804
    Thanked: 124

    Default

    Quote Originally Posted by WW243 View Post
    My advice would be to spend as much time as possible looking into this forum. The depth of knowledge here is pretty astounding and many experienced members are willing to help someone starting out. But, again, don't bypass what has already been written. Next, get a good camera.
    Going hand in hand with this would be if you have a smartphone, install the Tappatalk app so you can reference the forum whilst on the go.
    "Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead

  10. #9
    Senior Member blabbermouth Leatherstockiings's Avatar
    Join Date
    Apr 2013
    Location
    Rural Missouri
    Posts
    4,981
    Thanked: 972

    Default

    I am not sure about magnification being necessary. The kind of damage I was referring to would be visible to the naked eye, like hairline cracks. You might not see them under poor light but become apparent under better lighting.
    Last edited by Leatherstockiings; 07-31-2013 at 05:12 PM.
    rolodave likes this.

  11. #10
    Senior Member eod7's Avatar
    Join Date
    Oct 2012
    Posts
    546
    Thanked: 40

    Default

    Sounds like they have the razor thing covered, let me share a way to lowball a reluctant seller.

    Say you want that razor they have for $50. Hold your money in your hand and approach them. Greet them and immediately hand them the money (they will automatically take it) and say "Hey, I like that razor, here's $30 for it." Once they have the money, they really, really don't want to hand it back and will often go for the deal.
    One time, in band camp, I shaved with a Gold Dollar razor.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •