Results 1 to 10 of 25
Hybrid View
-
03-24-2011, 03:43 AM #1
Giesen & Forsthoff, #571, 6/8 Real Horn
Has anyone had a chance to use one of these new stock G&F yet ? if so tell me what y'all think about them, you can buy em new for less than a c-note !
-
03-25-2011, 01:13 AM #2
The new Timors from what I have read are of lower quality than the vintage variety in terms of their edge taking ability which is attributable to either the steel used or craftmanship employed, and in all likeliness the heat treatment they are subjected to. I would suggest therefore, that if you wished to acquire a new razor for less than a 'c-note,' which I infer to be colloquial dialect for US currency, that you consider if you have not already, various models of Dovo.
-
The Following User Says Thank You to Scipio For This Useful Post:
blugill (03-25-2011)
-
03-25-2011, 01:26 AM #3
-
The Following User Says Thank You to holli4pirating For This Useful Post:
blugill (03-25-2011)
-
03-28-2014, 01:45 AM #4
- Join Date
- Nov 2013
- Posts
- 758
Thanked: 104I have just received the #571 G & F brand new for as you put it for under a 'c' note. 1st up small areas of rust near the pin & tang. Not a huge amount,, but any rust is clearly no good. 2nd, though I'm not a super exeprienced honester, this razor is seriously hard to get a decent bevel on it. I've had 3 sessions, walking away each time, unsatisfied as to the level of shave readiness. I'm not ready to give up on it at all, but it does not take an edge even close to the tops 5 dovo's (Prima, Klang, B'marck etc). I get the feel with this razor that it will 'click' one day and I'll have a bevel to polish. But no bevel yet. Sure to piss you off,but I'm going to stay at it for a while yet. As you guys said, it's less than a $100, and if I've made a mistake with buying this one then too bad. I'm not naming the retailer, probably not their error re the bit of rust. This razor looks to have come straight from the factory. I've taken most of the rust off. I wont let it get dry ever again. So, in 2 weeks I'll come back to you. Re the bevel, this is probably 70% my technique fault and 30% the razor, so let's not hang em yet. Cheers Bobski
-
03-28-2014, 02:26 PM #5
- Join Date
- Apr 2013
- Posts
- 50
Thanked: 3I bought 6 various models of them to put up on retail at my barbershop. I would say I am an experienced honner with at least a 100 different razors honed under my belt (I run a local honing service here in Ottawa).
These are absolute worthless junk razors... I would vote to add them to the list of razors to avoid. First the bevels are at least 300 strokes away (with tape) and the steel is so crappy that you will not be able to get a fine edge. I also share this opinion with a Montreal gentleman who is even more experienced than I am in honing razors. I wouldnt be surprised if the gold dollar razors have better steel than these.
Some of their scales are descent but if you want to shave with the razor, best look at a decent yet affordable vintage brand razor such as Kropp, Boker etc... Stay Away
-
03-31-2014, 10:43 AM #6
They've been on the list for some time.
-
The Following User Says Thank You to gugi For This Useful Post:
samircanada (03-31-2014)
-
04-01-2014, 03:40 AM #7
- Join Date
- Nov 2013
- Posts
- 758
Thanked: 104Sometimes gents, honing can be a SOOTHING process. So after you have cursed the retailer, the brand and yourself, for being the idiot who bought it, Every few days, when you are bored, try the pyramid, or the progression method, throw in the Japanese method, and if you are really...I mean really down, watch a Murray Carter video. If you still can't get a shaving razor....go back to the start....Bit like putting in golf, if you played 18 holes and had 40 putts, most of the time the putter stays in the bag....but there are known occasions when the putter ends up in the lake, on a filfthy day the whole bag ends up wet. So if you bought a g & f recently accept that you will get to know it well over the coming weeks, or it's in the lake OR you are!
-
03-28-2014, 02:36 PM #8
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,552
- Blog Entries
- 1
Thanked: 3795
-
03-28-2014, 05:58 PM #9
I myself haven't heard much good about these razors, based on people's experiences. I would use a Gold Dollar (and I do) much before I would use one of these.
-
03-30-2014, 06:18 AM #10
- Join Date
- Nov 2013
- Posts
- 758
Thanked: 104No guys, no mistake, the Giesen & Forstoff str8t is very ordinary. The 'New' razor arrived rusty at the pin & Tang. totally dull, and still dull 2 sessions later. No muckin about this razor isn't worth a zac. Do what I did and buy it cause it's cheap. Then curse yourself for being the dumb bastard who bought it!