Printable View
and i'm intrigued with the shape but unsure if this razor needs any special treatment when it comes to honing.
I am worried about honing down the belly.
Also i am curious if the belly is added to give more stability to the extention of the blade?
Attachment 177063
Just hone it like any other full hollow has been my experience with bellied blades. I do use a layer of tape on the spine on all my razors. Yes, the belly helps with blade rigidity.
Bob
As BobH said go ahead and hone the razor as you would any other full hollow. Tape is optional for shavers who hone their own straights.
This advice is dead-on. But -- just one thing -- this is a case of insufficient razor porn. Where's the rest of this razor?Quote:
Originally Posted by BobH
This a legitimate concern from 2 directionsQuote:
Originally Posted by Raol
1. Pressure, the Bellied Hollows are probably the most sensitive grind when it comes to honing pressure, so be extra carefull so as not to flex the balde and touch the belly to the hone.
2. Wear, The "Feel" of the shave will change If/When you hone the razor into the "Belly" of the blade, this is true of all razors but especially true of the Bellied Hollows..
This is a question, not a comment:
I assume that a bellied blade would be more sensitive to spine wear, since the altered geometry might bring the belly into contact with the hone?
Who is the maker of that Razor,looks very familiar to me.
I'd suspect so too and that possibly being the case, along with not using too much pressure when honing as Glen suggested, taping the spine would not seem out of place.Quote:
Originally Posted by Dzanda
Bob
Yeah i always hone with tape and my touch/pressure has become lighter especially with this baby.Quote:
1. Pressure, the Bellied Hollows are probably the most sensitive grind when it comes to honing pressure, so be extra carefull so as not to flex the balde and touch the belly to the hone.
2. Wear, The "Feel" of the shave will change If/When you hone the razor into the "Belly" of the blade, this is true of all razors but especially true of the Bellied Hollows..
I usually aply black felt marker to see where the blade touches the hone.
Here is the Porn Stimp.
You will notice the blade is unmarked/unknown. Perhaps the name was buffed off, i don't know?
But not a bad looker though.
Attachment 177090Attachment 177091Attachment 177092
Nice, bet it is loud.
Bob
I'm wondering if the blade is a grind reject. Look at the spine on the side that's usually stamped with the makers mark. Then compare it to the back side. The spines are different at the shoulders and there is no stabilizer on the shoulder, Something I would expect to see with an extra hollow.
Perhaps it should have looked more like this.
Attachment 177100
It still looks to be a fantastic razor. I hope it shaves as well as it looks.
