Behold - My Wade and Butcher 15/16th smiling wedge!

Got it last week, finally pinned the new scales on it. My first piece of Sheffield steel, and my first wedge. Its absolutely fresh, hone wear is minimal, and very even. Edge has a good bevel on it. a few stains, but pretty much no rust, some one has scrubbed it with something abrasive, but i didn't have the heart to nuke out the original finish by sanding it, so i just rubbed it down with some Maas.

Attachment 185212Attachment 185209Attachment 185211Attachment 185210

Next step is some honing to bring it up to a shaving edge. I've been honing razors for a year, but every thing i have is hollow ground, so im a little nervous about putting it to the stone, just finished up on gssixguns honing tutorial for smile wedges, would love to find some more info though and watch some more tutorials before i go at it.

Hope you guys enjoy, sorry for the shit pics using a phone camera.

Put it to the stone, looks like this is actually about a quarter hollow ground, it just kind of hard to see.

Having some serious problem getting it to take a bevel though :(

What kind of problems exactly?

Bob

It takes a lot longer to make a new bevel than it does to repair a damaged one. Getting to the bevel being perfect is a long road. Tape is my friend when it comes to bevel string on heavy ground razors. I will start with two or three pieces and drop one near the end. I often change that top piece several time in the process. They don't always get done in a single sitting either. Some use DMT's or less than 1K hones to start it. I always just stick with the 1K as it has given good results,but you have to be patient. The project looks good. It does have very crisp lines.

Quote:

---

Originally Posted by BobH

What kind of problems exactly?

Bob

---

Bevel is more uneven that i originally thought, it tapers to the heel on oneside, and its flatter in the middle on the other. the grind also leans to one side at the heel (like alot of old sheffields)

Coming from honing hollows and extra hollows this is a whole nother world.

Quote:

---

Originally Posted by RezDog

It takes a lot longer to make a new bevel than it does to repair a damaged one. Getting to the bevel being perfect is a long road. Tape is my friend when it comes to bevel string on heavy ground razors. I will start with two or three pieces and drop one near the end. I often change that top piece several time in the process. They don't always get done in a single sitting either. Some use DMT's or less than 1K hones to start it. I always just stick with the 1K as it has given good results,but you have to be patient. The project looks good. It does have very crisp lines.

---

This was it, needed a second layer of tape (i'm the kind of guy that likes hone wears and doesn't normally tape a razor) one layer just wasn't quite enough to get the bevel right.

She's all shave ready now!

EDIT: just did a two pass shave, she really is a nice shaver.