13 Attachment(s)
Cleaned Up My Otto Deutsch Hans With My Dremel & Mothers Chrome Polish
Here is how I cleaned up my Otto Deutsch Hans I recently got off eBay. The fist pic is what it looked like when I got it.Attachment 186427
I then took it to my kitchen sink where I did the work to it. I usually take the razor apart but this one i didn't, I just carefully worked around the scales. If I leave the scales on I usually put tape on them to protect them but I wanted you to get a better picture of how I did this. I have had several members on here say that they would never use a Dremel on a straight razor but I learned from Lynn's dvd on how to use it the correct way on one. I have not screwed up yet......knock on wood. I cannot stress enough that you must be very careful if using a Dremel on a straight razor or it can be disastrous. You must alway watch which way the tool is spinning or it may grab your blade & crack or chip it. I applied Maas Metal Polish to the blade & went to work with my Dremel. I start polishing.
Attachment 186428Attachment 186429
The same applies to the shoulder except I am polishing perpendicular to the blade but with the polishing wheel spinning away from the blade to prevent any damage as you can see in the photo. I then carefully polish the tang & tail. I also carefully polish spine as well. If it starts to get warm, it is a good idea to let it cool before you begin again.
Attachment 186430Attachment 186431Attachment 186432Attachment 186433
The next photo is of the name on the scales after just wiping them off.
Attachment 186434
I then used Mothers Chrome Polish on the scales.Attachment 186435Attachment 186436Attachment 186437
There you have it, nice & polished!Attachment 186438Attachment 186439
If you look close enough, the scales weren't black like I originally thought. The dull spots are glare, not smudge from my fingers. After polishing them, you can barely see the blade through the scales when the blade is closed. They're dark green as always!
