Thread: TI steel

I saw a TI Silverwing being offered in the BST thread not long ago, RAD kicked in and now I'm looking at buying a new razor and in quite honesty I do like TIs. Even if their QC is not always on par, their blades can be really good shavers, plus I really like their shoulder-less blade designs.

I was looking at some razors and I noticed there are still older razors from TI to be found that says Sheffield Silver Steel and I think that was the steel they used before the C135 steel.

So I'm not sure what I would want to buy a Silver Steel or the C135 steel razor. Maybe there's not much difference, but I was was wondering if anyone has both these type of razors and what your opinions are about these blades?





Thanks in advance!

I believe they make one model they call Sheffield silver steel, It's still C135, still C135 is excellent steel extremely hard stuff holds a great edge.


Blade Finish: Sheffield C135 'Singing' Silver Steel, fully hollowed with a mirror polish and real 24k gold etch wash.

Blade Dimensions: 7/8'' Round Nose

The etch wash illustrates the heads of a wolf and a sheep with text of 'Sheffield Best Silver Steel Guaranteed'. The tang is stamped 'Thiers-Issard Made In France'.

I also found this info from someone who had already contacted Thiers.

I did get a response directly from TI, and they said that the "Sheffield Silver Steel" is a cosmetic etching only and that the blade material is the same as their other C135 blades. So, it's not from Sheffield, it has no silver, but it is steel.

Thanks!

That sounds pretty good, I hear good things about that steel, takes some times on the hones but once you put that finish you like on 'em they shave mighty fine and last for a good time!

It´s not important for you choice, since obviously both blades are made from the same steel.

But maybe it is interesting for future purchases:

C135 is a pure carbon steel, which means it is only alloyed with carbon. The alloy is 1,35% Carbon, (+ small amounts of manganese, silicone) rest iron.

"Silversteel" nowadays is 1.2210. It´s a low alloy cold work tool steel (but often also called "carbon steel" even if it´s not to 100% correct) The alloy is: 1,2% Carbon, 0,7% Cr and 0,1%Vanadium (+small amounts of manganese, silicone) , rest iron.

Both steels are excellent for razors and the differences are negligible. The c135 might be slightly harder after tempering, while the 1.2210 should be a bit more wear resistant due to it´s fine chromium and vanadium carbides. As long as the heattreating and hardening is done properly, both will give great shaving results.

best regards,
Ulrik

Aha! That is interesting, thanks for the knowledge!

I see Vanadium stamps on my working tools, the more you know

A lot of normal working tools are made from "chrome vanadium steel" but in that case it is a steel with far lower carbon content, because such tools have to be rather tough than hard. It´s more like 0,35% Carbon, 0,7% Chrome and 0,1% Vanadium.

best regards,
Ulrik

Apparently, at some point in time, someone actually tried making steel will silver in it. The silver improved the ability of the steel to take a mirror finish, but it was detrimental to the ability of the steel to take and hold an edge. Thus, silver is no longer used. But someone figured that "silver steel" would be a great marketing slogan. Thus, it is often used for any steel (C135 included) that will take a mirror finish. I love razors with highly polished steel.