Page 1 of 3 123 LastLast
Results 1 to 10 of 23
Like Tree19Likes

Thread: Blade oil?

  1. #1
    Senior Member
    Join Date
    Dec 2016
    Location
    Bassfield MS
    Posts
    105
    Thanked: 23

    Default Blade oil?

    I did a search, but didn't find much, or maybe my search parameters were off.

    Anyway, I've been using Camellia seed oil but an about out. It works, but before ordering more was wondering what everyone else uses?

    Thanks.

  2. #2
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Manotick, Ontario, Canada
    Posts
    2,768
    Thanked: 550
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  3. #3
    Senior Member
    Join Date
    Dec 2016
    Location
    Bassfield MS
    Posts
    105
    Thanked: 23

    Default

    Thanks, I'm seeing a lot of "blade" oils that are basically mineral oil. I have to wonder how well that would work?

  4. #4
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Manotick, Ontario, Canada
    Posts
    2,768
    Thanked: 550

    Default

    I’ve only used paraffin oil. I put a dot on each side of the blade and spread it over the entire blade and tang with my fingers - careful not to touch the edge and cutmyself. Then I put a dot on the pivot and open and close a few times to work it into the pin area.

    Even when I take a blade that’s sat a while, the oil has remained clear and comes off with a simple wipe on a towel.
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  5. The Following User Says Thank You to DZEC For This Useful Post:

    will52100 (04-12-2019)

  6. #5
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    Ren Wax, mineral oil, gun oi;, wd 40, Ballistrol, you name it it can be used. but i dont oil any blade unless its put up for months on end, no issue so far and Memphis is a high humidity area. the real key is dry tje blade well, i leave mine open for overnight then close and put up or reuse.
    ScottGoodman, BobH and jfk742 like this.
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  7. #6
    Senior Member
    Join Date
    Sep 2018
    Location
    Palm Harbor Fl
    Posts
    371
    Thanked: 48

    Default

    I use clippercide spray. Works great. My blades that are stored long term I use frog lube. I have used mineral oil with no issues in the past.

  8. #7
    Senior Member basil's Avatar
    Join Date
    May 2010
    Location
    toronto
    Posts
    1,156
    Thanked: 406

    Default

    I use ballistol oil. A drop on each side and rub it in to cover the blade. Been using for almost 10 years now and no issues.
    Haroldg48 and Bob1955 like this.

  9. The Following User Says Thank You to basil For This Useful Post:

    will52100 (04-12-2019)

  10. #8
    Senior Member
    Join Date
    Nov 2016
    Location
    Chicago Suburbs
    Posts
    1,091
    Thanked: 292

    Default

    Camellia oil is the traditional blade oil used by Japanese swordsmiths for preserving steel blades. However, it is high in oleic acid and it will oxidize (turn rancid) over time. However, as a monosaturated fatty acid, oleic acid is less susceptible to rancidity than polyunsaturated fatty acids. For short term storage, camellia oil, or even olive oil would be suitable.

    For long term storage of blades, it would be best to use either a fat high in saturated fatty acid such as coconut oil, tallow or lard, or a petroleum based oil such as mineral oil or petrolatum (Vaseline). Waxes such as Rennaisance wax are also suitable. Many gun oils, such as Rem Oil are basically a lightweight mineral oil, so they will work.

    Food grade silicone spray might also work, but if you get any on the scales, you might have difficulty maintaining a proper grip on the razor.

    Since the blade will be in contact with your skin, it would be best to avoid any substance that is toxic.

  11. The Following 2 Users Say Thank You to RayClem For This Useful Post:

    ScottGoodman (04-13-2019), will52100 (04-12-2019)

  12. #9
    Senior Member blabbermouth
    Join Date
    Jun 2013
    Location
    Pompano Beach, FL
    Posts
    4,015
    Thanked: 631

    Default

    Just a thin coat of mineral oil.

  13. #10
    Senior Member alex1921's Avatar
    Join Date
    Jan 2017
    Location
    Woodbury, Minnesota
    Posts
    579
    Thanked: 225

    Default

    Balistol for regular storage. The blades that get used regularly just sit in the open, so far no issues. The true rare specimens that will live unused get wrapped in VCI and placed in plastic bags with dessicant.
    Learner likes this.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •