Printable View
I picked up a razor at the antique show last weekend. It was covered in black oxide and even though it is shallowly etched because of it I there is no rust.
I think I can save it. Anyway. The front is lost, maybe. What intrigues me is that the etch on the front says that it is a "medium hollow".
What is a medium hollow?
Does anyone have a pic of one of these? I looked in the wiki and could not find one.
I would guess it means 1/2 or 1/4 hollow rather than saying hollow ground and meaning full hollow.
Just speculation though.
I am thinking half. Definitely not a 3/4 hollow.
1/2 it is then most likely. Which makes sense if you consider wedge large and full hollow small, then 1/2 hollow would be medium.
Congrats on a unique find.
I have one that while not marked half hollow is probably close to yours.
Wostenholm, George & Son "Celebrated IXL Razor" 5/8 - Straight Razor Place Wiki
It mercilessly cuts through anything in its way.
Here is one as well. But I am not sure its a Wosty. But the shinier one is for sure. Its an IXL
I believe "medium" refers to the size of the blade as this one apparently does:
http://straightrazorpalace.com/attac...h-img_3960.jpg
Thats a Wosty. It has a pipe on it.
Mine is stamped Wosty on the back, the pipe on the front of the tang and then engraved on the front of the blade.
If I only had a camera.
That was what I was thinking too,Lee.Quote:
I believe "medium" refers to the size of the blade as this one apparently does:
+1 on what Lee said. It's not the grind, it's the size. For the English, anything that is "hollow" seems to be about 1/4-3/4 hollow. Most that are marked as "Medium hollow" seem to be about 5/8, while many of the W&B "Hollow Ground" (w/ or w/o "Celebrated") seem to be more like 7/8.