Thread: Restorable or just a look pretty?

Hey guys. New member here, and I got a question. I found this at the local antique store and can't identify any makers marks. It just says "Soligen" on one scale and the rear of the blade. The blade looks to be okay to me, but I don't know what I'm looking at. There is some obvious pitting further into the curve of the blade near the spine, but the edge appears to be in great shape. There is some rusting and tarnishing on the blade but that is easy to take care of. My question is this. Is this worth trying to restore and use or would it be a good look pretty? And does anyone have any idea on the maker or origin? Sorry for the poor pics, but all I had was my cell phone.
Thanks in advance gents.

I would say that razor is definitily worth restoring, I c some what could be some pitting on the blade but it dosent look to bad i would say find someone in the classified to restore it. good luck

That razor scares me a bit. I noticed someone "tried" to reshape the heel.

I would try to set a bevel on it and see what you find before I put any time and effort into restoration.

Originally Posted by Slartibartfast

That razor scares me a bit. I noticed someone "tried" to reshape the heel.

I would try to set a bevel on it and see what you find before I put any time and effort into restoration.

I c that now i think you should definitaly do that,i dident notice that untill i took a closer look at the pics.if its will take an edge then its worth it.

i'd find something better.

Put it in a drawer until you can do it yourself. It'll probably be alright but don't drop big bucks on it.

Originally Posted by gugi

i'd find something better.

It can be saved, but I have spent less on better blades!

The grind on that razor is one of my favorites! I agree with the suggestion to try putting a bevel on it first. But... be assured that the edge has oxidized and weakened the steel so that weakened steel must be removed first and then the bevel created after that. About 100 laps on a 1000 grit should get rid of the oxidized steel. Unfortunately you will only know if you have removed enough when you hit the 8000 grit. If there is still poor steel on the edge then it will show up as microchipping and an inability to hold an edge while shaving.

Hope this helps,