Thread: Safety Razor versus Straight Razor: Compare and Contrast.

How does a safety razor compare to a straight razor in...

Quality of shave

Likelyhood of cutting oneself

Other

Discuss

IMO its easier to get a higher quality shave with a DE because you must master the technique with a SR before getting a similar shave. Part of the SR expierence is just that learning the art of sharpening and maintaining an edge and learning how o use it. Personally I'm pretty new to this game but have already expierenced a superior SR shave relative to a DE. I'm still early in the learning curve and consistency isn't there yet.

No question a SR can cut you faster than a DE. Respect the blade all the time. Just today I relaxed bait wiping water off my blade with tissue when I noticed it sliced through the tissue and went a layer or two into my finger. It didn't bleed and was less than a paper cut but I was lucky. An unplanned event and a wake up call.

Much of the wet shaving process is the same but learning the art of using a SR is the appeal. IMO once done the SR is a superior shave. If you're up for the challenge try SR shaving and stick with it.

So far for a newbie I've done pretty well.

Originally Posted by rmagnus

IMO its easier to get a higher quality shave with a DE because you must master the technique with a SR before getting a similar shave. Part of the SR expierence is just that learning the art of sharpening and maintaining an edge and learning how o use it. Personally I'm pretty new to this game but have already expierenced a superior SR shave relative to a DE. I'm still early in the learning curve and consistency isn't there yet.

No question a SR can cut you faster than a DE. Respect the blade all the time. Just today I relaxed bait wiping water off my blade with tissue when I noticed it sliced through the tissue and went a layer or two into my finger. It didn't bleed and was less than a paper cut but I was lucky. An unplanned event and a wake up call.

Much of the wet shaving process is the same but learning the art of using a SR is the appeal. IMO once done the SR is a superior shave. If you're up for the challenge try SR shaving and stick with it.

So far for a newbie I've done pretty well.

For me, honing was never part of the equation.

When I get a razor, it either comes shave ready, or I send it out for a honing.

Then, with proper use of stropping and maintenance, the blade should be good for a year. If your new to SRS, you may go harder on a blade your first go around...that's normal.

I've gone so far as I have a CroX pasted balsa board (you can paste a strop), which I will use to touch an edge if I feel a bit of tugging or pulling. When the CroX gives up, I use my coticule or a barbers hone to refresh the razor, that will work for several months (approx).

Now, most will encourage you to have more than one razor, so if you can rotate your blades, just using those steps should keep you in business for quite a awhile, maybe a year before you have to send it out for honing. More razors in your rotation, the longer you can stretch it out, and while you have some to shave with, others can be out.

Honing, and actually being good at honing, are two different things in my opinion, and I'd rather send my out to let a professional do it, than invest the cash and time to try to learn how to hone. From what I've read here, you'd have to do 5-10 razors a day for a year to get proficient at it.

That's my take on it, works for me, YMMV...either way, enjoy!

Safety razors are for people who want to invest in a great shave and then go to work.

If friends call you Shotrod Tinkerfinger and your motto is, "If it ain't broke then take it apart and find out why not" you will prefer a straight razor.

So it is.
So has it been.
So shall it forever be.

I don't really shave with safety razors too much but I find the quality of a straight razor shave is beyond compare of a safety razor. I have never been able to get a bbs shave from a safety. I also have cut my self more with a safety than with a straight which is probably due to the fact that I rarely use a safety razor and thus haven't gotten comfortable with it. I will say though that it was easier to use a DE than it was to learn a straight razor. Also, and this is probably why most people like to use straights, straight razors are more involved. They require more care than just rinsing and changing the blade every few days. You have to hone them and strop them and that takes skill and practice so it becomes a hobby to get the best shave from that blade. Whereas with a DE, if you dont like the edge than all you do is pop in a different brand of blade and your ready to go. Not saying that I dont like de's. They're great when your traveling or in a rush but the straight razor is a little more involved. If I were to compare it to cars a mach 3 or cartridge razor would be a care that drives itself I.e. no skill involved and a de would be an automatic honda where any one can drive one once you learn the fundamentals and a straight is a full blown race car. Anyone can learn to drive one but it takes money, time and patience to learn and a high level of dexterity and it becomes a hobby and sometimes a passion.

When you are learning to use a DE (safety) razor you are probably more likely to cut yourself than with a straight.
Straights require a steady and gentle hand to get your required angle.
DEs provide the angle but the type of blade is a HUGE variable. I have some blades that give a close and smooth shave and others that continually cause nicks. Same razor, same technique but different blades. While you're finding the DE blade you like best there are likely to be a number of minor cuts.

Might take a bit longer to get to the point where you're getting the type of smooth shave with a straight that you're after. But in my experience far less blood involved than with the DE blade trials.

Once you've got your technique (and blade selection) dialled in then the results are likely to be fairly similar. The straight gives you just a bit more control over angles and you're far less likely to use too much pressure The prospect of slicing yourself is a better reminder than the possibility of a little post-shave irritation.

I like both. The learning curve is (much) less with a DE.

You have to really be careful with a straight as most of the cuts are due to being careless. The cuts are usually when positioning the blade rather than when actually shaving.

You can cut yourself with a DE as well but you don't have to be quite as careful as with a straight.

The appeal of the straight is (as already mentioned) the learning required to master the technique of shaving and honing (and perhaps restoring).

It's all wet shaving however and I do both for variety. Anything is more enjoyable than cartridge or electric shaving.

If you mate the right DE with the right blade with you the shave you get can come very close to a straight but it will never be as close. As far as cuts go a DE wasn't termed a safety razor for nothing.

I like both. I also throw in SE razors into the mix.

As has already been mentioned, DE razors (and safeties in general) are easier to master quickly. The shaves are equally close once you work out the technique properly.

One area that the safety razors work better than straights in my hands is on the upper lip. I can get a pretty close shave without an ATG pass with a straight on the upper lip, but it's not perfectly smooth. With a safety, I can do the ATG pass and get it smooth. I've never been totally comfortable with trying an ATG pass with a straight in that area.

I have a handful of de's. Only ever feel the need to use one of them. I get a great shave when I use it.

Sr's are my passion. So I have to have variety. And it's a total high when I shave with a razor that I've honed to perfection.

Michael