Page 1 of 3 123 LastLast
Results 1 to 10 of 23
Like Tree5Likes

Thread: Honing DE blades?

  1. #1
    Senior Member
    Join Date
    Nov 2012
    Location
    Seattle,WA.
    Posts
    579
    Thanked: 55

    Default Honing DE blades?

    I know that DE blades are relatively inexpensive but I'm curious as to if it's possible to extend their life by honing?

    I have an old bakelite hone for DE blades. It is flat on one side (for single blades and straight razors) and is curved on the other side (for double safety blades).

    It would be interesting to play around with honing those blades but I won't do so if it's known to not work out well.

    I don't have a DE razor or blades at the moment or I would try it out.

    Does anyone have an old curved hone as I've described and does it actually work (well) to extend a DE blades life?

    I'm thinking about getting a Gillette Super Adjustable at some point just for variety and in addition to my straight razor.
    earcutter likes this.

  2. #2
    Senior Member blabbermouth
    Join Date
    Jul 2011
    Posts
    2,110
    Thanked: 458

    Default

    They are so thin that you'd have to make a tapered steel holder to do it, and even then, you never know what the coating is on them.

  3. #3
    Senior Member blabbermouth
    Join Date
    Jan 2011
    Location
    Roseville,Kali
    Posts
    10,432
    Thanked: 2027

    Default

    Why bother? not worth the effort IMO

  4. #4
    Senior Member
    Join Date
    Nov 2012
    Location
    Seattle,WA.
    Posts
    579
    Thanked: 55

    Default

    I'm more interested in if it works than necessarily continuing to do it. It's actually no work however. Why throw something away if making 4 or 5 passes on the curved hone extends the life for another few days?

    No holder is required. You just put your thumb on the middle of the blade and slide it back and forth a few times and turn it over and do the same.

    These old safety razor hones were sold and I'm assuming were used as well. I'm just curious as to how well they worked.

    Maybe it doesn't work with the edge coatings used today?

  5. #5
    Orange County N.Y. Suile's Avatar
    Join Date
    Jul 2012
    Posts
    651
    Thanked: 30

    Default

    Quote Originally Posted by gcbryan View Post
    I'm more interested in if it works than necessarily continuing to do it. It's actually no work however. Why throw something away if making 4 or 5 passes on the curved hone extends the life for another few days?

    No holder is required. You just put your thumb on the middle of the blade and slide it back and forth a few times and turn it over and do the same.

    These old safety razor hones were sold and I'm assuming were used as well. I'm just curious as to how well they worked.

    Maybe it doesn't work with the edge coatings used today?
    I am inline to think they work well other wise people would not have bought them.

  6. #6
    Orange County N.Y. Suile's Avatar
    Join Date
    Jul 2012
    Posts
    651
    Thanked: 30

    Default

    But man haggeling with folks is the roots of my buying.
    so i got one curved hone for de blades a swiss de blade sharpener with two stones and one leather.
    and three that use the crank. but i have not used any of them yet.
    One of the stropping devices for them should possible work to get a few more shaves.
    cause by using it the unseen edge gets bent out of place so we strop the blades to get it correct.

  7. #7
    Senior Member Tarkus's Avatar
    Join Date
    Dec 2011
    Location
    I'm Gonna Spend Another Fall In Philadelphia
    Posts
    1,910
    Thanked: 495

    Default

    Since the creation of the safety razor there were countless companies that came up with the cure all for the dull D.E. blade. People bought into the idea of sharpening blades and saving a fortune. Little did they know that after they got these contraptions home they might if they were lucky to get 1 possibly 2 more shaves out of a blade.

  8. #8
    Senior Member blabbermouth Theseus's Avatar
    Join Date
    Mar 2011
    Location
    Ohio
    Posts
    2,786
    Thanked: 421

    Default

    The de hones were made back when the blades were just uncoated steel, allowing them to be sharpened. Todays blades are coated which, from my understanding, gives the blades much of their sharpness. Honing them would only serve to remove the coating.
    earcutter likes this.

  9. The Following User Says Thank You to Theseus For This Useful Post:

    earcutter (11-11-2012)

  10. #9
    Senior Member McBrautigam's Avatar
    Join Date
    Aug 2011
    Location
    Jackson, Michigan
    Posts
    297
    Thanked: 51

    Default

    What I have learned from a gentleman that was older than dirt itself is to use the bottom of a glass to act as a strop. The glass must be made of glass and also be concave. Place the DE blade in the bottom and rub it around flip and repeat. I have tried this and it did bring some of the keenness back. I only did it once so I have no clue as to how many times this might be done but I image it can be done more than once. It might scratch the bottom of the glass so don't use it on your wife's good ones.

  11. #10
    Senior Member Tarkus's Avatar
    Join Date
    Dec 2011
    Location
    I'm Gonna Spend Another Fall In Philadelphia
    Posts
    1,910
    Thanked: 495

    Default

    Here are a few examples
    Some pretty unusual ideas


    Name:  Safty Blade 1.jpg
Views: 773
Size:  36.3 KB
    Name:  Safty Blade 2.jpg
Views: 745
Size:  27.2 KB
    Name:  Safty Blade 3.jpg
Views: 680
Size:  34.2 KB
    Name:  Safty Blade 4.jpg
Views: 859
Size:  34.2 KB

  12. The Following User Says Thank You to Tarkus For This Useful Post:

    earcutter (11-11-2012)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •