Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Finally aboard

Hybrid View

  1. #1
    Member
    Join Date
    Apr 2007
    Posts
    94
    Thanked: 1

    Default Finally aboard

    Hi, All,
    I've been reading posts on this site for months trying to accomplish the daunting task of st8 razor shaving. Your tips have been helpful. Earlier, I tried on my own, hacking away, and eventually quitting. When I stumbled upon this site, my interest was restored and I'm now an accomplished str8 razor shaver. I no longer consider myself a newbie--thanks to you guys.
    I'm 54 years old and have no clue why I started this, but I'm now hooked and thoroughly enjoy the experience.
    Your past discussions on equipment also helped me purchase what I consider to be some of the finest products. Again, thanks!
    A couple of take-them-or leave-them tips for new guys starting out--(things I learned the hard way!):
    1) To avoid red lines place the razor flat on the face and then gradually lift it to 30 degrees as you start the stroke. I kept putting the blade on my skin at 30 degrees and created red lines. Eventually, you won't need to do this.
    2) Use zero pressure. Let "the weight of the blade" do the cutting.
    3) Stretching is everything. Again, I learned that the hard way. I now have two permanent scars that make me even uglier.
    4) Take a lot of feather-light short strokes--at least it worked for me.
    5) Don't attempt going across or against the grain until you've mastered with the grain. Again, I learned this the hard way.

    On a side note, and maybe a useful tip for someone out there: my daughter is an artist and made me a wonderful shave bowl. I hold it in the palm of my left hand while whipping up the lather. Anyway, I took 3 almond soap cakes, put them in the microwave oven until they melted. I stirred the liquid soap (looked like milk) and then poured it into the shave bowl nearly to the top. It was ready to perform the next day. It's a great way to build lather and I won't need to mess with more soap for months.

    Anyway, thanks to all of you for the advice the past few months.
    Ron A
    Last edited by Ron A; 04-22-2007 at 01:04 AM. Reason: incorrect spelling

  2. #2
    JMS
    JMS is offline
    Usagi Yojimbo JMS's Avatar
    Join Date
    Jan 2007
    Location
    Ramona California
    Posts
    6,858
    Thanked: 792

    Default

    Thats Neat!!
    Welcome aboard!

  3. #3
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Smile Welcome, Ron

    Thanks for saying 'Hi'.You have made some very good observations. I don't want to contradict any of the fine recommendations you make, but I do want to caution against leaving the blade still against your face. Even a micro-millimetre sideways motion could cut you. Always keep the blade moving forward.

    Tell me more about this artisan hand crafted with love shaving bowl. Got any pics?

    X

  4. #4
    Member
    Join Date
    Apr 2007
    Posts
    94
    Thanked: 1

    Default Here's the pic you asked for.

    Hi,
    Here's the pic--just for fun--of what I mentioned earlier.
    Attached Images Attached Images  

  5. #5
    The Voice in Your Head scarface's Avatar
    Join Date
    Aug 2005
    Location
    North Idaho
    Posts
    1,228
    Thanked: 8

    Default

    Whoa! -- that's real pretty

    you start posting pictures like that on this forum, and these fanatics will start placing orders!

    (...and you won't see your daughter for a year and a half...ask Colleen!...)

    -welcome to the forum!

    -whatever

    -Lou

  6. #6
    Senior Member sstulken80's Avatar
    Join Date
    Apr 2007
    Location
    SW CR IA US NA PE
    Posts
    172
    Thanked: 0

    Default

    Quote Originally Posted by sstulken80
    Quote Originally Posted by Ron A View Post
    Anyway, I took 3 almond soap cakes, put them in the microwave oven until they melted. I stirred the liquid soap (looked like milk) and then poured it into the shave bowl nearly to the top. It was ready to perform the next day. It's a great way to build lather and I won't need to mess with more soap for months.
    That's a cool idea! Once I've tried a few more soaps, I'll think I'll try that.
    So about an hour after posting this, I tried it with a cheapie ceramic coffee mug I wasn't using. I placed the cake inside the mug and zapped it for about 30 seconds. Pretty slick result! The nice thing is that it can't develop scum underneath the soap either!

    - Scott

  7. #7
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Default

    Quote Originally Posted by Ron A View Post
    Hi,
    Here's the pic--just for fun--of what I mentioned earlier.
    That's nice alright. What's the finish like? Smooth? A little rough?

    X

  8. #8
    Member
    Join Date
    Apr 2007
    Posts
    94
    Thanked: 1

    Default

    Glassy smooth...and since it was baked on at high temps, the smooth finish will never wear off.

  9. #9
    JMS
    JMS is offline
    Usagi Yojimbo JMS's Avatar
    Join Date
    Jan 2007
    Location
    Ramona California
    Posts
    6,858
    Thanked: 792

    Default

    Quote Originally Posted by Ron A View Post
    Hi,
    Here's the pic--just for fun--of what I mentioned earlier.
    Really nice!!


    so when will she open up for business?

  10. #10
    Senior Member sstulken80's Avatar
    Join Date
    Apr 2007
    Location
    SW CR IA US NA PE
    Posts
    172
    Thanked: 0

    Default

    Quote Originally Posted by Ron A View Post
    Anyway, I took 3 almond soap cakes, put them in the microwave oven until they melted. I stirred the liquid soap (looked like milk) and then poured it into the shave bowl nearly to the top. It was ready to perform the next day. It's a great way to build lather and I won't need to mess with more soap for months.
    That's a cool idea! Once I've tried a few more soaps, I'll think I'll try that.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •