It's cool having the shaving video in here. OK folks, we gots us a new home......lol. Hope this helps. Lynn
Printable View
It's cool having the shaving video in here. OK folks, we gots us a new home......lol. Hope this helps. Lynn
So are "we" going to migrate here, and reserve the yahoo group for a backup during down times?
We can be wherever we want to be! The Yahoo forums here are integrated with the other Yahoo forums. People that want to stay there can, and will still be a part of the group.
People that want to come here, and use all the other forums, can do that too... Anyone can do anything :)
David
TQH
Quote:
Originally Posted by Kelly
I must say i like this forum better, it is more what i am used to, it is cleaner to navigate, messaging is better, you have better view on the messages...
best of luck, straightrazorplace :)
I can't wait to download the Lynn shaving video. I must wait till i get to work!#:
Three things I notice on Lynn's video:
1) the angle of his razor sometimes looks like way more than 30 degrees
2) tho he says there isn't, it sure looks like he's putting pressure with the razor on the strop. the way the strop goes down at the point of contact....
3) never mentions leading with the tip, and sometimes doesn't appear to do so. Is this because of not stropping at an angle, but rather with blade perpendicular to strop?
I'm about a week into straight-razoring, learning something new every day
The stroping confused me too, i tought that the strop should be PERFECTLY flat when you strop.
And the lowbandthwith video file is sooo jerky... I hope the larger file is OK.
Okay, Just trying out the posting here for the first time. :roll:Quote:
Originally Posted by adjustme69
It's like movin' in to a new home. :D :arrow: :idea: :!: emoticons are fun, too. :P
Good job, folks! 8)
I'm pleased with my av here, too. LOL It's from a Pears soap ad.
Lynn, what are you riding in your pic?
Parry
You want the strop to be tensioned pretty well when stropping. I'm not talking about pulling a screw out of the wall or the knob off a door tight, just very little slack.
You use just enough pressure to keep the edge in contact with the strop. The stropping action should have a slight feeling of suction between the blade and the strop. I tend to strop very slowly, as this provides better feedback.
Lead with the spine, not the edge (unless you like purchasing new strops).
If you follow the X pattern, the blade remains perpendicular (90 degrees) relative to the strop. I usually start with part of the razor hanging off on the left side of the strop, then as I strop away from my body with the razor I try to end up with the same amount hanging off at the end of the stroke.
You can also angle the razor relative to the strop such that the entire blade is on the strop at an angle, say 45 degrees as a visual aid.
In either case, the heel of the blade leads the action instead of the tip. The heel is closest to the hinge pin. Either method is acceptable. Whatever produces consistent results.
Hope this helps.
- Kyle
Will try with a real razor soon. Right now i am practicing with a cheap shavette, both with hanging the strop, and laying it on the table, to get the different feel for surfaces.
Remember what I said in the video guys. The strop should remain flat and the pace should be slow. I was in a hurry for the video. Not the best stropping example.
Yep, but it sure was pretty to watch...
TQH
I am amazed how you din't make some spagetti from the strop:)
I am too.......I get nervous in front of cameras...... :roll:
Lynn, you say you get nervous in front of cameras. How many other videos have you made. LOL
I'm getting ready to do a shaving-honing series now, but I have had to do a bunch of executive presentation on video in the past......lol. Never gets easier for me. :D
Hey Lynn,
I was pokin around the net and found this site with a straight razor search.
http://www.venusworldwide.com/razors.htm
As it turns out, at the bottom of the page, there is a link to download your video, low-res version.
See, now you're world famous...
Or at least in Pakistan
Steve
TQH? Lynn's video was originally posted at the link below, wasn't it? The domain has expired? Anyway, if someone still has a high quality copy and is willing to share it here for the forum and the wiki, please let us know :) www.tqhstraightrazors.comQuote:
Originally Posted by dwessell
Lynn you need to make more shaving videos. Jockey's has more than you!!