Results 1 to 9 of 9

Hybrid View

thecornerbooth Not enough stropping or not... 12-16-2010, 10:25 PM
AFDavis11 That is a hard question. I... 12-16-2010, 10:30 PM
DwarvenChef Both can cause similar... 12-16-2010, 10:37 PM
thebigspendur Good stropping can help keep... 12-16-2010, 11:27 PM
hi_bud_gl I think you have chipped... 12-16-2010, 11:28 PM
LarryAndro With time and stropping, I... 12-17-2010, 12:42 AM
thecornerbooth not enough stropping seems to... 12-17-2010, 04:24 AM
Ryan82 It just occurred to me that... 12-17-2010, 04:55 AM
roughkype I do 20 strops linen then 60... 12-18-2010, 02:03 AM
  1. #1
    Carbon-steel-aholic DwarvenChef's Avatar
    Join Date
    Mar 2007
    Location
    Santa Barbara, CA
    Posts
    2,814
    Thanked: 823

    Default

    Both can cause similar symptoms, along with many other factors.

    Only way to find out what your issues are would be to start experimenting with your own gear to see what changes and how they feel.

    Even a wicked sharp edge can seem harsh depending on what you like, I lean twards the smooth shaving edge vs the ultimate sharpness edge. I just did one last night that was crazy sharp and it was just a bit to sharp for my liking. Could be the razor not liking that kind of edge, I've been experimenting with hardness of steel vs edge feel off Jnats vs Coticule and Cro2. Still early in the process so I don't have enough to go on yet...

  2. #2
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    33,267
    Thanked: 5028
    Blog Entries
    4

    Default

    Good stropping can help keep a razor shaving nice and smooth but to tell you the truth in instances where I had honed a razor and it was harsh all the stropping in the world didn't change that quality. Sometimes certain razors seem to do better with one hone over another or maybe one technique over another. We all know .25 diamond can leave a really harsh edge and Cr0 often times can smooth a harsh edge.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  3. #3
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    I think you have chipped edge. how bad or just little i have no idea.
    This may be too much stropping sign too.(it will take really long time to get there at least 7-10 shaves)
    Try get new honed blade and shave with it see what happens. if you don't have feeling then that will help you out to figure it out .
    next easier one will be to buy some loop etc and check the edge on 20 or 40x and see what is going on with the edge.
    please look the edge not the bevel.
    hope this helps.

  4. #4
    Texas Guy from Missouri LarryAndro's Avatar
    Join Date
    Jul 2009
    Posts
    1,135
    Thanked: 252

    Default

    Quote Originally Posted by hi_bud_gl View Post
    I think you have chipped edge. how bad or just little i have no idea...
    With time and stropping, I believe a blade can deteriorate in sharpness and/or in straightness. A blade can be quite sharp, but not straight. Or, straight but not sharp. Or, any combination.

    I am sure this varies with razors and strops and individuals. My experience is that stropping maintains sharpness for a very long time. But, that the edge slowly becomes more jagged. I think this is what Hi_Bud_GL refers to. And, when this develops, my whiskers are cut as easily as before with no increase in pulling. But, the face just doesn't feel quite as good as it should.

    Sharpness vs Straightness... You have to consider both possibilities.

  5. #5
    Member
    Join Date
    Apr 2010
    Posts
    65
    Thanked: 11

    Default

    not enough stropping seems to be the answer at this point.

    I have a 60x microscope so i looked at the edge to compare it with the edge that it had when i originally had it honed. It appeared to be about the same as when i had it honed.

    I also mowed down some arm hair on the inside of my arm near the pulse point of my wrist. That seems to have worked ok, but my arm hair is significantly thinner than facial hair.

    I don't have a linen strop so here is what i have been doing to simulate one. I place my jeans on my bed so the seam of the leg is parallel to the length of the foot board and smooth out the wrinkles. i did about 5-10 laps just to see what would happen to the feel of the draw on my strop. I did about 20 laps on leather after that. For giggles, i laid some newspaper out on the kitchen counter and did about 20 laps on that. Then, i went back to the leather and did about 30-40 more laps. This time, i did it differently in my mind. I had a different mental focus. i concentrated on keeping the entire length of the blade on the strop with even pressure while applying the actual pressure to the spine.

    The razor felt sharper and there was significantly less harshness and no pull. My shave feels a little bit closer too.

    There are too many variables to conclusively determine what is the real cause was unfortunately, but this was uplifting regardless.

    Maybe i should get a linen strop and see what happens.... I think i am probably not stropping enough. Is the effect of not enough stropping cumulative? E.g. if it takes me like 50 laps to get a razor ready and i don't strop for like 10 shaves, does that mean that i will need to do 500 laps or will i be able to get it back with some smaller number like 50-100?

  6. #6
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    It just occurred to me that you didn't say in the OP how many laps you're doing; kinda makes it hard for us to tell if you are indeed not stropping enough.

    Let's start at the beginning. It is not uncommon for many of us to do 50/50, as in 50 laps linen, 50 leather. Or 40/60, which is my preferred ratio. Try it for a few consecutive shaves and see what happens. Don't forget to let us know how it works out for you

  7. #7
    'tis but a scratch! roughkype's Avatar
    Join Date
    Oct 2010
    Location
    Durango, Colorado
    Posts
    2,080
    Thanked: 443
    Blog Entries
    2

    Default

    I do 20 strops linen then 60 leather, both before and after shaving. That's been working well for a variety of blades.
    "These aren't the droids you're looking for." "These aren't the droids we're looking for." "He can go about his business." "You can go about your business."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •