Printable View
Attachment 209814Attachment 209815The first razor is a 6/8 I think. it was described as bone scales. It's a Sheffield C Congrieves. I really don't thin the scales are bone. I hope there not plastic. the other is a wosty. 6/8 and horn scales. neither is in too bad of shape I think . I just hope there in my ability to clean up and hone. anyway this gives me 2 to play with.
Heavy grinds are all about taking the extra time needed to get the bevel perfect. Some need rolling strokes as well to get good coverage. You need to see how they behave on the stones.
Very nice indeed, should clean up nicely. I generally start with a brass brush, dish soap and water before going to sanding. Good luck,
I know the color is a little off but i'm hoping that the C Congrieves scales are old ivory but from the photos I see no chips or cracks so if they are bone that will be ok to.
Either way it goes with the handle material, those blades look like they will clean up well! I am starting to like the heavy grinds better for my daily shaving, but haven't tried to hone one just yet. Keep us posted!
They came in the mail today and I was surprised. Both turned out to be 7/8 instead of 6/8 and the yellow one is ivory. The Wostenholme was in pretty good shape I unpinned it and cleaned and polished. you can see the grind marks from when it was made and the scales have a small bug bite. I really don't know how far I will take it before I put it back together. The C Congrieves is a little different story. I unpinned it and cleaned the scales and put them in something that is suppose to clean them back to what they should be. I hope. the blade well i'm wearing out sheats of sand paper one after another. I know I can make it shave but whether or not it ever get's looking good I don't know.
That Congreve is quite rare, I think. Some history here. If you want, I will dig it up.
Sometimes too it is in part about how much time you are willing to put in. I have had some that I sanded and sanded and then sanded a little more to get past the pitting, in the end they were very nice, but I was not left feeling like it was time well spent. To take a near perfect razor and give it back its original finish is more easily done, but to hand sand what is essentially a regrind I'm not sure is where I like to go. Just to the point where it is a rust free razor that looks good for a hundred and will be in service for a great amount of time to come seems to be my happy medium for the most part. It's ok to look older if you are a hundred years old.
At this point I don't know which looks older me or the razor. I got looking ok. not great but ok. I got all the rust off it and theres just a few places where there's some devil's spit but not enough to make that much difference. I will start putting them back together and hone them. I may keep the wosty it's kind of nice but I haven't made up my mind yet on the C Congrieves.Quote:
Originally Posted by RezDog
If it's not too much trouble I would like to know a little more about this one. I don't know for sure but I believe it will hone up good. the shape is interesting a sway back with a smile and a thumb notch. It might look good in a case. I really think it's ivory but the color throws me off. I cleaned it with soft scrub and then soaked it in polly dent . the same stuff I use for my dentures. still yellow. is this something common.Quote:
Originally Posted by sharptonn
No trouble! Should be bone, from what I see. I will eternally refer to the expressions of the late Neil Miller in these regards. Wonderful words from him in this thread, yet lots of 'rubbish'! :D
Check post #13
http://straightrazorpalace.com/razor...ted-steel.html
Guess how long a fellow can hold his breath. I just got through repining the C Congrieves and to tell you the truth I was terrified I would break the scales. In this case I had rather be lucky that good. I got it repined. now I have the wosty's horn covered in neat's foot oil and tomorrow I will clean the oil off and re-pin it. I did notice some thing about the scales of the wosty. it had a pin for the blade and one for the wedge area and another in front of the wedge pin. It was as if the made a bo bo and repaired it with another pin. I cleaned up the washers as good as I could and after repining I will buff and try to make them shin. You know for some one whos as lazy as hell it seems I'm working an awful lot.
well I got the wosty and C Congrieves back to gether and took the other razor I received the other day out of the safe the Josph Rodgers and son and set in with the hones. Because I did a lot of sanding on the 2 razors I started with the 400 naniwa then the 1-3-5-8-12 and the finisher is the 20K. The all would cut the Hanging hair with no problem but when it came to the shaving the Joseph Rodgers shinned above both of the others. The wosty honed ok or I should say it felt ok in my hands but the C Congrieves was difficult. that uneven spin added with that little thumb knock under the blade and the fact I did not tighten the scales like I would a set of horn scales made holding the blade while honing. I will give it and the wosty a little more time before I decide whether to keep or let them find a new home. But the Joseph Rodgers has a home.
