Printable View
Attachment 215970
Attachment 215971
Attachment 215972
Attachment 215973
Attachment 215974
Attachment 215975
Attachment 215976
Attachment 215977
The blade wasn't sold as NOS but the packaging and sharpness of the blade suggest it is.
It feels shave ready to my thumb pad and whisks away hair on my arm with ease.
Tomorrow morning I'll test it out.
Let us know, cause I have one too with some blades, I have yet to try.
I have one as well. Jimmyhad told me it would work with modded DE blades, I have yet to try. The two pins have the square bases canted on the Butchers. A bit of discretionary scissor-clipping seems necessary.
Hey! I made a Segal work that way! :rofl2:
Finding a square punch that would do the job or having a punch jig made up would be the thing. I can see myself trying some tin snips on some blades.Quote:
Originally Posted by sharptonn
I've looked around but I can't find anyone who has even tried to sharpen the originals.
I think a pair of sturdy scissors, modding the blade while holding it inside an open cardboard box to catch the trimmings.
I will try it!
Like I said, it worked on my Segal! :rofl2:
The blade was not up to the task, unfortunately. It cut but tugged a lot, reminding me of the NOS Henckels safety blades I got with the razor. Given enough time, they just get dull. Probably corrosion even though they looked like new.
An alternative would be to round the square posts. I do have two now, one in extremely poor condition that might lend its self to experiment.
I offered at one point way back when to attempt to sharpen an original blade.
Hart, If you would like, I repeat my offer to you. I'm willing to give it a go if you are! =)
As the blade is useless as is, and there being nobody with successful experience to share, something could be done :). What ideas do you have for sharpening one? I hone my own razors with some success, but I don't have much experience.
OK, here are the pieces I had got together for the two wb safety razors.
1. Open comb from another old razor.
2. WB blade.
3. Good WB top cap.
4. Rough WB top cap.
5. Good WB bottom plate.
6. WB handle.
7. What came with rough WB cap.
Attachment 216585
I don't know where #7 came from but I got it with the rough cap, that did not come with the bottom plate.
You can see here the rust from the WB blade on #3, the blade is not stainless steel.
If you use one you definitely have to take it apart after each shave and dry and oil it.
Also, #4 has already been modified for regular blades, something I didn't even notice at first.
Attachment 216586
Here are #4,5,6 assembled with a Wilkinson blade. Note the bend in the cap.
Attachment 216587
I took a chance and tried it out. It shaved well and was still less aggressive with its bend than my R41:roflmao
Once straightened I think it will be a nice shaver.
I don't really know how I would hone a W&B safety razor, as I have never held one in my hands. My tactile brain needs to feel what kind of flex it has, and my eyes need to study the angles and what sort of fixture or jig I come up with will depend on the random facts I do not yet posses!
Attachment 216757I used a Whitney punch to alter a standard DE blade. When I was a pro tattoo artist I got the Whitney to punch tattoo machine springs. Made in Chicago for years back then, not sure now ......... Anyway ......... I tried shaving with an original W&B blade and it was like the old saying .......... no soap (IOW ..... like the saying, not that I didn't use soap) Anyway .......... :beer2:
Attachment 216753Attachment 216754Attachment 216755Attachment 216756
