Tape threads.....No this is not a tape vs No Tape discussion.

So.....we've all been there when we are new, right? Asking about tape or no tape or the geometry issues that may or may not happen when using tape, all to be told search for it in the search bar. Or we give a response that is a link to another thread. I get it. Most, if not all, of the veterans on this site are sick of tape threads. Not because the person asking it or that we are unwilling to answer or help, its just that there is a butt load of them and it feels like we're saying the same thing over and over again.

So here is my proposal. We make tape threads their own thread category. All tape threads compiled under one list. If some one has a question about taping, boom, it is now in an easy to find location. No needing to use the search bar or any of the sort. No clogging of the honing section with tape threads.

What do you guys think?

Your bringing this up again ? Only, a thread about tape threads ? You should see the thread about guys who talk about tape threads first :<0)

I'm finishing a paddle/bench strop PDF now,,,, if the powers decide, then I can compile the best of the tape/no tape information into a PDF in the library,,,, it's up to the Admin. as to if that is the way to handle it or leave it as it is,,,:shrug:

Quote:

---

Originally Posted by 10Pups

Your bringing this up again ? Only, a thread about tape threads ? You should see the thread about guys who talk about tape threads first :<0)

---

I was not aware there was that many people with the same idea. I have never seen another post suggesting this. I am going to file a petition to congress then for this matter. I expect I will get some signatures.

Right after they make a forum for HHT 1-infinity ......... they might consider a forum for tape ......... :w

But we have a multitude of tape threads already. Still, the question keeps being discussed. Having a 'tape thread' subforum won't change a thing, IMO.

There is a better solution to this, so you'll just have to wait on the mentors to work it out.

The problem really is not whether this information is readily available, but the fact that so few seem willing to do the research to find it before asking the inevitable questions.

I propose a FAQAOAOA . Frequently asked questions asked over and over again. Maybe just have the top ten in there. the question is, who would read it ?

Quote:

---

Originally Posted by 10Pups

I propose a FAQAOAOA . Frequently asked questions asked over and over again. Maybe just have the top ten in there. the question is, who would read it ?

---

it's so much easier to ask a question than to see if the questions already been asked and read through all the answers.JMO

Quote:

---

Originally Posted by ace

The problem really is not whether this information is readily available, but the fact that so few seem willing to do the research to find it before asking the inevitable questions.

---

I think it's a valid request - searching for 'tape' in the google search bar yields 100 results and they are sorted by google's algorithm of what is most relevant.
The dumb forum search results in 293 threads containing the word tape (sorted by title alphabetically, number of replies, number of views, first post, last post, username alphabetically, or forum - pretty rudimentary in relation to information).

I don't think it is unreasonable to have a different filtering based on the knowledge of the experienced members - say 5-10 threads. The question, of course, is who are those experienced members who would provide that knowledge and while there are many more the mentors seem like the simplest set that's already existing (and anybody else could still contribute suggestions by going through a mentor). The infrastructure for it already exists, even though it's not used properly.

Quote:

---

Originally Posted by 10Pups

I propose a FAQAOAOA . Frequently asked questions asked over and over again. Maybe just have the top ten in there. the question is, who would read it ?

---

Agreed - also include a clear pointer to the search and advanced search functions on SRP.

And finally, make sure this link is included:

Let me google that for you

This issue comes up on gaming forums a lot. The old salts get tired of new members asking the same questions and having same discussions on stuff that has already been covered to the salt's satisfaction.

You have to admit that after reading tons of threads on something folks will still like to talk about it and that's what forums are for. Popular topics should have their own sub-forum if they clutter. It could go in the Advance sub-forum.

But, hey I have just a quick question about... :roflmao

You either tape all the way through your honing progression or you don't use it at all. Problem averted.

I quit taping. When I get confused about an issue like honing to the point I stop doing it, I simplify things.

Does the tape go on the hone to prevent hone wear on the spinal column of the razor?

Quote:

---

Originally Posted by WW243

Does the tape go on the hone to prevent hone wear on the spinal column of the razor?

---

Thats a stupid question.

Everyone knows it goes on the edge to prevent cuts

Quote:

---

Originally Posted by cosperryan

Thats a stupid question.

Everyone knows it goes on the edge to prevent cuts

---

i thought a tape was used to measure the length of the razor

On a straight answer type mindset I would say all questions are welcome. I don't see many go unanswered. It's a great way for someone to focus on their problem at any specific level of their path to learning. I go into the library to look something up and I may reread 10 other things. Maybe forgetting what I came for. Kind of like a dog sniffing around and wind up ten miles from home :<0)

Tape? lemme think...................



Tape!

Quote:

---

Originally Posted by 10Pups

Your bringing this up again ? Only, a thread about tape threads ? You should see the thread about guys who talk about tape threads first :<0)

---

In keeping with The Real World of "reality" shows, I propose this thread be called: "Men Who Talk About Tape Threads... And The Women Who Love Them" (we could get Geraldo Rivera to host/moderate it... maybe).

I recently purchased some balsa wood and contact adhesive, using a strop i had kinda killed on day one i have fashioned a nifty little paddle strop.
Should i be putting tape on the handle area?

Quote:

---

Originally Posted by stev

I recently purchased some balsa wood and contact adhesive, using a strop i had kinda killed on day one i have fashioned a nifty little paddle strop.
Should i be putting tape on the handle area?

---

Since you are in Sunderland, Stev, I would say yes. Most definitely! :D

Quote:

---

Originally Posted by sharptonn

Since you are in Sunderland, Stev, I would say yes. Most definitely! :D

---

So i can identify it after it has been stolen by the local hoodlums :hmmm:
i guess you have been to my city :rofl2:

I love tape.

James.

8-track is the bestests!!!

Wiki article?

Quote:

---

Originally Posted by gugi

8-track is the bestests!!!

---

What about beta-max. You ever try honing with those?

Quote:

---

Originally Posted by cosperryan

What about beta-max. You ever try honing with those?

---

1k shreds it..............trust me!

This conundrum makes me think on how I see 'the latest news flash' on TV about some 'new' revealing scientific study on why it hurts to touch a hot wood stove! Every few years the same revalations. The longer your alive and have experinced, the more younger people have not experienced yet and need to be taught. Just gotta grin and bare it, and show 'em the way.

If a tree falls in the woods and no one is there to hear it, would tape have made a difference?

Quote:

---

Originally Posted by JimBC

This conundrum makes me think on how I see 'the latest news flash' on TV about some 'new' revealing scientific study on why it hurts to touch a hot wood stove! Every few years the same revalations. The longer your alive and have experinced, the more younger people have not experienced yet and need to be taught. Just gotta grin and bare it, and show 'em the way.

---

Yeah, but do you remember being amazed by the newspaper articles revealing the scientific studies on why it hurts to touch the Argand lamp?

I certainly remember having to explain to those young neanderthals that they shouldn't be touching the sticks while they're burning. That Prometheus guy decided to use the user manual to start the fire he gave them so it was a lot of fun watching them discover how to use it by trial and error:)
And Mr. L got so excited that he decided to set up a whole place where these experiences are repeated over and over and over...

Quote:

---

Originally Posted by gugi

Yeah, but do you remember being amazed by the newspaper articles revealing the scientific studies on why it hurts to touch the Argand lamp?

I certainly remember having to explain to those young neanderthals that they shouldn't be touching the sticks while they're burning. That Prometheus guy decided to use the user manual to start the fire he gave them so it was a lot of fun watching them discover how to use it by trial and error:)
And Mr. L got so excited that he decided to set up a whole place where these experiences are repeated over and over and over...

---

I keep telling everyone you are older than dirt, Gugi! Been there, seen that! ;)

You trying to smear me!!!! Good thing you didn't add water :p

The proper noun is not 'dirt' but 'stars'... actually it's the big bang, but we try to keep it family friendly...

I stand corrected..............Stars! :roflmao

Gugi's mind is older than stars, but he keeps refreshing the bodies after about 30 years...

James.

Quote:

---

Originally Posted by Jimbo

Gugi's mind is older than stars, but he keeps refreshing the bodies after about 30 years...

James.

---

Stop it, James. Brings a picture to mind!
Regards,
Bruce

Yeah, the used up ones are commonly referred to as Bruce - that's why you have so many of them and you can never have too many.

We cannot help it! :D We are who we are.
Regards,
Bruce