Results 1 to 10 of 18
Thread: Questions on strops
Hybrid View
-
07-11-2014, 08:01 PM #1
Questions on strops
I finally purchased a quality straight razor, a W&B, from someone in shave-ready condition (the razor I mean). I already have soaps, brushes etc., but I'm wondering about stropping and also what else I should get, now and/or eventually.
I actually have an Illinois strop from an ill-fated attempt to get a straight razor in the 1990s:
It's an Illinois 835, but it looks a bit different from the 835s I see for sale online.
I also have a piece of wood with leather fixed to to both sides (the leather's about 3" wide) that I have for sharpening knives:
I have the Illinois strop currently hanging from a screw in my bathdoor door (set about head-height). That's probably not ideal for stropping, no? What is the best way/place to attach this sort of strop?
How would using my leather-fixed-to-wood strop compare to the hanging one? is it worth reserving the former for compounds? or is it better just to get balsa wood for those purposes?
FInally, other than stropping (and occasionally using chrome oxide?) should I be bothering about doing other things to maintain the edge? I think for the first time it needs rehoning, I'll probably send it out. (Though eventually I'd like to learn how to hone). Is it worth picking up a very fine waterstone or film for mild rehoning?
-
07-11-2014, 08:13 PM #2
I have my strop hanging at about waist high and use a simple cup hook screwed into a window frame. This thread has some really good info and videos on stropping.
http://straightrazorpalace.com/strop...st-2012-a.html
-
The Following User Says Thank You to Leatherstockiings For This Useful Post:
emacsomancer (07-11-2014)
-
07-11-2014, 08:51 PM #3
-
The Following User Says Thank You to Haroldg48 For This Useful Post:
emacsomancer (07-11-2014)
-
07-11-2014, 09:03 PM #4
I used to like to watch pro barbers strop when I was a kid, and as I grew older, though you didn't see them too much after the 1970s/80s. Anyway, most all had their strops hanging waist high from their barber chairs. Many of the old Koken chairs had a hook built in to the chair for hanging a strop. I usually attach mine to a zip tie on a door knob. Hangs about waist high and that is how I am used to stropping. That Illinois ought be be a good one IMO.
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
The Following User Says Thank You to JimmyHAD For This Useful Post:
emacsomancer (07-11-2014)
-
07-11-2014, 09:56 PM #5
- Join Date
- Aug 2006
- Location
- Maleny, Australia
- Posts
- 7,977
- Blog Entries
- 3
Thanked: 1587Yeah, I agree - waist high (or slightly higher) seems a natural height for stropping. Having said that I've seen head height stropping - it happens at a 45 degree incline - and the person seemed quite comfortable with it.
I suppose it depends on what you have available to hook it to, and what you are most comfortable with.
The illinois looks fine. To me, the leather on wood looks OK too, but a good strop needs to be smooth, so don't use it if it isn't. And of course be careful of those staples holding the leather to the wood. Some people find when starting out with stropping that a paddle strop (in essence what you have with the leather on wood) is easier as it is rigid with no sag.
Pasting a strop with abrasive compounds is a one-way street: once you go there you cannot ever go back (i.e., your leather is forever impregnated with abrasive and can never be used as a plain leather strop again). So keep that in mind when deciding what to do with the pastes. The choice is yours of course, but if it were me I wouldn't be pasting Illinois, I'd leave it as my plain leather strop. Perhaps just grab some balsa to start with, see how that goes.
If you strop well you can maintain the edge for a while. Though when you first start out that's probably not going to happen. You can also maintain (or touch up) an edge with the pastes and CrOx can be used for that, definitely. At this stage I'd concentrate on that, and think about stones down the track. Maybe something like a barber's hone could be useful, but I'd see how I went with CrOx (maybe whip up another leather on wood contraption for the CrOx, or as you say, try balsa).
James.<This signature intentionally left blank>
-
The Following User Says Thank You to Jimbo For This Useful Post:
emacsomancer (07-11-2014)
-
07-11-2014, 10:02 PM #6
-
08-21-2014, 06:04 PM #7
- Join Date
- Aug 2012
- Posts
- 51
Thanked: 0
-
08-21-2014, 11:25 PM #8
Probably best posted in its own thread.
But i would say that convention says a strop is necessary, but if you can get a consistent shave by using your upper arm etc then for you they aren't. Can i ask why you dont want to get a strop? If it is financial then they really arent that expensive.Bread and water can so easily become tea and toast
-
07-12-2014, 12:34 AM #9
I hang my strop at either head height or just above waist height depending on where i am, i do lke at least a bit of uphill. I have to ut a hook in at my new house, thats going to be about solar plexus height, just because of where i have been allowed to put it (on a wall below a towel rail, in a position hidden by towels when not in use).
Jimbo, what do you use on your handbags then, just the cheap stuff?Bread and water can so easily become tea and toast
-
07-12-2014, 03:07 AM #10
I have paracord looped around my bathroom doorknob and my strops hook on that. No fuss no muss.
I first thought that a pasted strop was super important to maintain a good edge. Which at first was true as I was learning but ultimately leather clean leather is ample.