Good morning, I recently bought chromium oxide powder, I would like to make solid sticks, what product can I use to solidify the oxide?
Thanks
Camina solo y llegaras rápido , camina acompañado y llegarás más lejos...
Printable View
Good morning, I recently bought chromium oxide powder, I would like to make solid sticks, what product can I use to solidify the oxide?
Thanks
Camina solo y llegaras rápido , camina acompañado y llegarás más lejos...
It will take a lot of pressure to turn the powder into a stick. You can make it into a paste by adding a small amount of light mineral oil.
You can melt beeswax and mix the Cox in it. Or you could buy a green dialux stick and be done with it.Quote:
Originally Posted by Cheka
Enviado de meu Moto Z2 Play usando Tapatalk
Thank you, is that I buy a large quantity powder at a very good price and wanted to make some stick
Camina solo y llegaras rápido , camina acompañado y llegarás más lejos...
Not a crayon answer:
I have made a lather with a cheap "paint brush" in a cup and added the CrOx to it and then painted the green lather onto a canvas or linen material and let it dry. Then rub with a clean clothe to remove excess powder..
By the way, some CrOx is not to be trusted as it is used for colorant and the partical sizes vary greatly.
Good luck!
~Richard
PS, years back, folks on the forums made hones with CrOx mixed into melted shellac or hard wax. In "Mentos" tins!.
well that is interesting.. would you know how well that worked?Quote:
Originally Posted by Geezer
Sent from my iPhone using Tapatalk
The one I received is just too shiny to do much good. A polish but not enough to really refresh a blade. Perhaps, like barber hones, the amount of Crox to the binder was insufficient to make it work well.Quote:
Originally Posted by waldbrent
~Richard