Results 1 to 7 of 7
Like Tree1Likes
  • 1 Post By Brontosaurus

Thread: Paste on Leather

  1. #1
    Senior Member
    Join Date
    Jan 2011
    Location
    Panama City Beach FL
    Posts
    309
    Thanked: 25

    Default Paste on Leather

    I see a lot of post with people adding paste of whatever color to their leather strop.
    Personally I don’t think I can bring myself to put paste on a fine English Bridle Strop. I’ve been a straight shaver continuously since 1995 and on and off from 83’ to 95.
    My Father in Law and his Father we’re both Barbers and neither of them ever heard of putting paste or anything else on leather.
    I do use a fabric weave strop that I treat with CRX. I use a Crayon to apply it.
    I also have a hard will felt strop that I spray with either Crx spray or .025 diamond spray.
    I don’t use dressing on my leather strop. I just rub it with my palms good every few days. Maybe once a year I’ll had a few drops of Neatsfoot oil and rub it in with my Palms.
    I only use the fabric with Crx when the edge feels like it might need a slight tune up. When it does I will do about 6 strokes on the fabric wipe the blade with tissue then strop 50 times on the leather and shave. If the edge still needs work I go the 12K Naniwa and dobten laps followed by ten strokes on Fabric with CRX the 50 strokes on leather and this almost always does the trick. My razors are HHT Sharp. I test the edge on at least 4 different places on the edge with a single hanging hair. I keep working on the razor until it possess this test.
    Everyone has their own routine. Mine is one that has evolved through the years always subject to change.

  2. #2
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Manotick, Ontario, Canada
    Posts
    2,771
    Thanked: 551

    Default

    I made two bench strops using cheap leather scraps obtained from a fellow who makes leather goods. The leather isn’t of a quality that you would want to regularly use as a strop on good razors so I pasted one of those with CrOx and use it only on blades right after I have restored them to see if I need to continue with the hones. I also use it one my kitchen knives.

    I have a 2-sided paddle strop with hard felt on one side and balsa on the other. The felt has diamond spray and the balsa has CrOx. I use it to touch up a blade that needs some attention, but not so much that I want to go to the stones. My good paddle and hanging leather strops are untouched except, as you describe, when I rub my palms on them to warm up and condition the leather. Haven’t had to apply neatsfoot oil to them yet.
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  3. #3
    Senior Member Brontosaurus's Avatar
    Join Date
    Feb 2011
    Location
    Les Vosges, France
    Posts
    924
    Thanked: 185

    Default

    There are modern trends, but old-school barber's pasted strops may be more of a European tradition. In France, I've seen folks use pasted loom strops for the most part. My barber over there always runs a 3/8 near wedge over a severely slackened (or de-tensioned) small, pasted loom strop before cutting my hair with the 3/8.

    If you want to experiment in this way, I would suggest starting off with some vegetable-tanned leather belting. Cut it to length with a utility knife and sand it with 80x, 120x, and 180x sandpaper (vacuuming off the dust after each grit) to give the surface some tooth, followed by an application of either Solingen red or black crayons, or both if you have two sanded pieces of leather. Otherwise, yes, I would not want to gunk up a nicely finished dedicated strop with paste.
    Last edited by Brontosaurus; 06-17-2018 at 02:41 PM.
    gssixgun likes this.
    Striving to be brief, I become obscure. --Horace

  4. #4
    Senior Member
    Join Date
    Nov 2016
    Location
    Chicago Suburbs
    Posts
    1,091
    Thanked: 292

    Default

    I have a Tony Miller fast bridle leather strop and would never consider putting any paste or spray on it. However, I have made a number of bench strops by gluing vegetable tanned "tooling" leather to balsa or basswood that has been sanded flat. I use Elmers Extreme Glue Sticks to bond the leather and wood. The tooling leather and other supplies can be purchased from most hobby/craft stores. I usually purchase 8 1/2" x 10" squares and cut it into three pieces. You can experiment with both the smooth side and suede side of the leather to determine which you prefer.

  5. #5
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,966
    Thanked: 13226
    Blog Entries
    1

    Default

    There were multiple types of "Pastes" used back in the day


    Lead, Ash, Talc, Iron Oxide, all kinds of things were used trying to push the edge
    "No amount of money spent on a Stone can ever replace the value of the time it takes learning to use it properly"
    Very Respectfully - Glen

    Proprietor - GemStar Custom Razors Honing/Restores/Regrinds Website

  6. #6
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    I have a lead pasted strop, that is a Scrupleworks extremely nice horsehide. if it goes on my razors why not a really good strop under the paste?, thinking about leading my Kanayama. as for the original question, the guys over on the far side of the ocean have been doing this longer than us and they use paste a lot. Tc
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  7. #7
    MEMBER
    Join Date
    Apr 2015
    Location
    VERO BEACH, FL
    Posts
    903
    Thanked: 96

    Default

    I use the Mastro Live CroOx paste on my SRD paddle strop English leather and it works great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •