Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Chromium Oxide

  1. #1
    Member
    Join Date
    Jul 2008
    Posts
    63
    Thanked: 5

    Default Chromium Oxide

    Hi gents,

    I live in the UK and am trying to purchase some Chromium Oxide green paste that I can use to carry out the final polish of my straight edge.I will either apply it to a strop or balsa wood paddle. Do you guys know anywhere where I can purchase the product as I am having problems finding a supplier.

    Secondly, have you any other suggestions on what I should use other than the Chromium Oxide for a final polish. I have a coticle and diamond pasted paddles,its just the final edge that I am hoping to improve on.

    Regards

  2. #2
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  3. The Following 2 Users Say Thank You to hoglahoo For This Useful Post:

    ChrisL (07-29-2008), Karakoup1 (07-29-2008)

  4. #3
    Senior Member
    Join Date
    Jul 2008
    Posts
    186
    Thanked: 5

    Default

    I have found that you can buy it for about $12 a pound at various rock pollishing web stores.

  5. #4
    Senior Member Karakoup1's Avatar
    Join Date
    Mar 2008
    Location
    Warsaw, Poland
    Posts
    110
    Thanked: 3

    Default

    Quote Originally Posted by PonderingTurtle View Post
    I have found that you can buy it for about $12 a pound at various rock pollishing web stores.
    Hello!

    I just wanted to add my two cents here...

    Of course, you can find it there... BUT... what one knows about trully is inside? Dye? Chemicals?

    You name it....

    Then, the question to ask yourself is about the granulometry....

    The next one is... Have someone you know tried it?

    To answer to Dave, I would definitively recommand him my red paste... which with my green, are giving a more confortable shave than one can have with diamond pastes. (Go in the "Classified")

    I am surely a little more expensive, because I am providing a service as well along with it, but definitively less expansive than a Japanese 10'000 or 30'000 chinese/japanese stone.

    BBS yours,

    Valentin
    Last edited by Karakoup1; 07-29-2008 at 07:10 PM.

  6. #5
    Senior Member
    Join Date
    Feb 2008
    Posts
    1,588
    Thanked: 286

    Default

    Hi there i live in the uk and would be happy to send you some cronium green powder which i got from hand american you just mix it with some dovo strop paste well ido and apply a tiny covering to a paddle strop i have tryed on a normal dovo strop and i find it works on my tony miller paddle a lot better lets put it this way 25 passes on the paddle strop after honing on my norton and my razor will pass the hanging hair test. Hair of my chest. My email is [email protected]. email me and i will send you some cheers gary.

  7. #6
    Senior Member blabbermouth ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,445
    Thanked: 834

    Default

    Quote Originally Posted by PonderingTurtle View Post
    I have found that you can buy it for about $12 a pound at various rock pollishing web stores.
    The reality of using chromium oxide .5 micron powder for our purposes (final polish of razor edges and maintaining edges) is that the powder goes such a long way, the amount the size of a large almond could last someone a year or two if they use it to apply to a strop or two and also put some on newspaper for stropping. Seriously. A pound of chromium oxide .5 micron powder in volume would be about the size of a tennis ball or more. My point is, much much more than anyone would ever need for our purposes.

    The other point that is rarely brought up is that the chromium oxide we use is quite hygroscopic ("the ability of a substance to attract water molecules from the surrounding environment through either absorption or adsorption")
    The wiki definition.

    That could be bad for stropping delicate edges on what used to be powder but after being stored improperly for potentially years, could end up being unfriendly hard gritty chunks, etc.

    If someone gets into restoring blades and has a vibratory tumbler, I think larger quantities of chromium oxide make more sense. Even then going through a pound of it when only a little bit would be needed to refresh the polishing media would take quite a long time.

    Don't get me wrong, the stuff wouldn't be hurting anything if someone buys way more than they'd need, but I'm just saying be sure to make room on your shelf!

    Chris L
    "Blues fallin' down like hail." Robert Johnson
    "Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith

  8. #7
    Senior Member
    Join Date
    Jul 2008
    Posts
    186
    Thanked: 5

    Default

    Quote Originally Posted by Karakoup1 View Post
    Hello!

    I just wanted to add my two cents here...

    Of course, you can find it there... BUT... what one knows about trully is inside? Dye? Chemicals?

    You name it....

    Then, the question to ask yourself is about the granulometry....
    At least one I found lists it as sorted to .5 micron.

  9. #8
    Senior Member
    Join Date
    Jul 2008
    Posts
    186
    Thanked: 5

    Default

    Quote Originally Posted by Chrisl View Post
    The reality of using chromium oxide .5 micron powder for our purposes (final polish of razor edges and maintaining edges) is that the powder goes such a long way, the amount the size of a large almond could last someone a year or two if they use it to apply to a strop or two and also put some on newspaper for stropping. Seriously. A pound of chromium oxide .5 micron powder in volume would be about the size of a tennis ball or more. My point is, much much more than anyone would ever need for our purposes.
    Oh I was aware of that, it is just that I was currious and looking for web sources as hand american seems to be down.

    So I was trying to figure out where I could actualy get some.

    The other point that is rarely brought up is that the chromium oxide we use is quite hygroscopic ("the ability of a substance to attract water molecules from the surrounding environment through either absorption or adsorption")
    The wiki definition.

    That could be bad for stropping delicate edges on what used to be powder but after being stored improperly for potentially years, could end up being unfriendly hard gritty chunks, etc.
    Would baking it clear that up? It does for some other highly hydro scopic things.

  10. #9
    Senior Member blabbermouth ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,445
    Thanked: 834

    Default

    Quote Originally Posted by PonderingTurtle View Post
    Oh I was aware of that, it is just that I was currious and looking for web sources as hand american seems to be down.

    So I was trying to figure out where I could actualy get some.

    I understand completely.



    Would baking it clear that up? It does for some other highly hydro scopic things.
    I guess it's possible. I have had no reason to try this however.

    Chris L
    "Blues fallin' down like hail." Robert Johnson
    "Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith

  11. #10
    Senior Member
    Join Date
    Jul 2008
    Posts
    186
    Thanked: 5

    Default

    Quote Originally Posted by Chris L View Post
    I guess it's possible. I have had no reason to try this however.

    Chris L
    Thinking it might work, but you might still need to mechanicaly break up the clump, and I don't know if normal honeing would do that.

    When maxing powder with water do the clumps stay or disolve?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •