Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31
Like Tree5Likes

Thread: Common stropping mistakes?

  1. #11
    Newbie for life! jmueller8's Avatar
    Join Date
    Jan 2009
    Location
    Colorado
    Posts
    196
    Thanked: 20

    Default

    Quote Originally Posted by fccexpert View Post
    Some common mistakes:

    Slapping the edge against the strop when you roll the razor. It's called rolling, not flipping for a reason.
    I had no idea this one was a problem for me Well, I'll re-re-re-correct myself again! Thanks for the post!

  2. #12
    Senior Member kevint's Avatar
    Join Date
    Mar 2008
    Posts
    1,875
    Thanked: 285

    Default

    Quote Originally Posted by AFDavis11 View Post
    Strong concurrence on all these aspects as well the fact that stropping correctly can fix many of these problems. I'd say all of these problems, if mild, can be corrected by correct stropping.

    I also think that a minor mistake can create a dull but smoother razor and the dullness can lead to a problem. Bad stropping technique may not be apparent to the user.

    I would also suggest, stopping being a problem. The blade can never stop on the strop.

    I think another big picture mistake is not knowing how a strop should be dressed appropriately. So although the technique is great, the surface itself isn't so good.

    I recall doing an experiment in damage about a year ago that showed to me anyway that sag was a bigger damager than pressure.
    Damager

    I highlighted that in red because this is key to a newbie, being one I know.

    Being stubborn it took me extra-long to figure out that getting some result was still leaving alot at the table. Switching from using pressure; edge torqued, on hard leather paddle- to spine pressure on thin hanging strop was like night and day.

  3. #13
    W&B, Torrey, Filarmonica fanboy FatboySlim's Avatar
    Join Date
    Aug 2008
    Location
    Atlanta
    Posts
    605
    Thanked: 252

    Default

    Disclaimer: I'm not a stropping expert. But I do have some expertise on some things I was sincerely doing wrong until pretty recently, that held me back for months. If I can help somebody else avoid my mistakes, I will speak up.

    My first mistake was to think that stropping wasn't really important or particularly beneficial to an edge. Wrong. While I can't scientifically explain to you exactly *why* stropping makes such a difference to maintaining and even improving a solid starting edge - it just does. It's not a small difference.

    Speaking for my own personal case, my two biggest mistakes were:

    1. Sloppy rolling/flipping. I was concentrating so much on my stroke up and down the strop that I minimized the technique I used to flip the razor at the end of each stroke. I fumbled around by manually changing my grip on the razor at each end of the stroke, which affected the consistency of my speed and blade angle, no matter how "smooth" I thought I was. Thumb roll or wrist roll doesn't seem to matter (I thumb roll), as long as it supports a smooth, CONSISTENT stroke. Doing it correctly honestly feels very unnatural at first, but it's so key, just learn how to do it smoothly. Practice the flip with the razor in mid-air, and move to a practice strop. You WILL cut your strop while learning, unless you have way better hand/eye coordination than I do. Learn on a cheap strop. Watch some member stropping videos.

    2. Excessive slowness. In my own opinion, excessive slowness in the stroke is even more counter-productive than too much pressure. For me, a light stroke is much easier to learn than a solid, confident, quick stroke. I stroked lightly and incorrectly for months, because I was too slow and inconsistent. You don't have to strop in a blur to be effective, but in my own personal experience, 40 - 60 light strokes per minute gets you much farther and sharper than 10 - 30 strokes per minute. Just my experience.

    With a practice strop, I timed myself. With my best "fast stroke," I was consistently getting about 25 strokes per minute. In actual day-to-day practice when I wasn't timing myself, I'm sure it was lower. My edges deteriorated slowly, and stropping seemed to have no effect. Once I got the thumb roll down, I kept the light consistent strokes, but my speed increased to 40 - 50 strokes per minute. The difference was night and day. Sharp razors finally stayed sharp, and extra-hollow razors actually improved their edge with repeated post-shave stroppings. Because of the compressed time, my number of strokes increased, which didn't hurt either. Thirty strokes evolved into 100 strokes in the same time.

    Pardon the long post, but the importance of stropping really went right past me when I started this last fall. I thought stropping was "obvious" and not worth my attention. So I wasted a lot of time questioning my honing and shaving technique unnecessarily, and even went through a time when I questioned the effort/benefit of all this. Who re-hones the same razors every few days?! Learning to strop properly turned the corner for me, and let me get the real benefit of the honest time I'd put in learning to hone and shave.
    Angelo1 likes this.

  4. The Following 5 Users Say Thank You to FatboySlim For This Useful Post:

    Lawrence (05-08-2011), MW76 (01-25-2016), pjrage (03-04-2009), rastewart (03-12-2009), STF (10-30-2019)

  5. #14
    Stubble Slayer
    Join Date
    Jan 2009
    Location
    Alexandria, VA
    Posts
    708
    Thanked: 171

    Default

    Quote Originally Posted by FatboySlim View Post
    Disclaimer: I'm not a stropping expert. But I do have some expertise on some things I was sincerely doing wrong until pretty recently, that held me back for months. If I can help somebody else avoid my mistakes, I will speak up.

    My first mistake was to think that stropping wasn't really important or particularly beneficial to an edge. Wrong. While I can't scientifically explain to you exactly *why* stropping makes such a difference to maintaining and even improving a solid starting edge - it just does. It's not a small difference.

    Speaking for my own personal case, my two biggest mistakes were:

    1. Sloppy rolling/flipping. I was concentrating so much on my stroke up and down the strop that I minimized the technique I used to flip the razor at the end of each stroke. I fumbled around by manually changing my grip on the razor at each end of the stroke, which affected the consistency of my speed and blade angle, no matter how "smooth" I thought I was. Thumb roll or wrist roll doesn't seem to matter (I thumb roll), as long as it supports a smooth, CONSISTENT stroke. Doing it correctly honestly feels very unnatural at first, but it's so key, just learn how to do it smoothly. Practice the flip with the razor in mid-air, and move to a practice strop. You WILL cut your strop while learning, unless you have way better hand/eye coordination than I do. Learn on a cheap strop. Watch some member stropping videos.

    2. Excessive slowness. In my own opinion, excessive slowness in the stroke is even more counter-productive than too much pressure. For me, a light stroke is much easier to learn than a solid, confident, quick stroke. I stroked lightly and incorrectly for months, because I was too slow and inconsistent. You don't have to strop in a blur to be effective, but in my own personal experience, 40 - 60 light strokes per minute gets you much farther and sharper than 10 - 30 strokes per minute. Just my experience.

    With a practice strop, I timed myself. With my best "fast stroke," I was consistently getting about 25 strokes per minute. In actual day-to-day practice when I wasn't timing myself, I'm sure it was lower. My edges deteriorated slowly, and stropping seemed to have no effect. Once I got the thumb roll down, I kept the light consistent strokes, but my speed increased to 40 - 50 strokes per minute. The difference was night and day. Sharp razors finally stayed sharp, and extra-hollow razors actually improved their edge with repeated post-shave stroppings. Because of the compressed time, my number of strokes increased, which didn't hurt either. Thirty strokes evolved into 100 strokes in the same time.

    Pardon the long post, but the importance of stropping really went right past me when I started this last fall. I thought stropping was "obvious" and not worth my attention. So I wasted a lot of time questioning my honing and shaving technique unnecessarily, and even went through a time when I questioned the effort/benefit of all this. Who re-hones the same razors every few days?! Learning to strop properly turned the corner for me, and let me get the real benefit of the honest time I'd put in learning to hone and shave.
    Thanks for this. This is exactly what I was looking for. You can definitely put me in the boat with the newbies who didn't think stropping was/is THAT important. I just looked at it as "something you do before you shave." I definitely go very slow (never timed, but wouldn't be surprised if it's ~15-20 strokes per minute - I stroke very slow and consistent and flip very slowly so as to not slap the blade down and try to make sure to keep the blade level through the end of stroke, etc), and I don't think my overall technique is all that great. I was just going to let it come naturally over time, because I figured it didn't make that much difference. I'm definitely going to sit down and practice even more and try to get it down better.

  6. #15
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Quote Originally Posted by AFDavis11 View Post
    I think another big picture mistake is not knowing how a strop should be dressed appropriately. So although the technique is great, the surface itself isn't so good.
    Alan, can you elaborate on proper dressing of the strop. I have pretty much used mine as is.

    One thing I can contribute to this thread is my experience with different ways of holding the razor while stropping. In this excellent barber manual in the help files honing and stropping are the topics covered. (this displays sideways on many computers but really is worth printing out to make sense of it IMO)

    The manual says that the razor should be held perfectly flat against the strop with the strop held taut.

    The pressure applied to the razor must be heavy enough to feel a firm drag or draw. (on a horsehide A.K.A. shell strop I can't see how this is possible without applying too much pressure )

    "The razor is held with the thumb on top of the shank and rolled in the hand without moving the wrist. This not only makes for equal pressure on both strokes but also makes the act more graceful and easy."

    I had been at forum member and IMO honemiester The Topher's house and he had watched me strop. He said that I was rolling my wrist and that was an incorrect technique. I then re-read the barber manual and started working on breaking the habit.

    Then in this thread here I discovered that holding the razor between thumb and the center of the first pad of the forefinger as described by ben.mid and gssixgun gave me the ability to strop the razor much more gracefully and easily then I had been using my method of holding it between the thumb and the second joint of the forefinger.

    Amazing how slight changes can affect the feel of the stropping. Holding it like that gave me much more sensitivity to how much pressure I was putting on the blade.

    BTW, the manual recommends "First learn to turn or flip the razor by holding it in one position without making the strokes". For a new guy that seems like a good idea.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  7. The Following 4 Users Say Thank You to JimmyHAD For This Useful Post:

    JCitron (03-05-2009), Megaslow (03-15-2009), rastewart (03-12-2009), STF (10-30-2019)

  8. #16
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    Quote Originally Posted by fccexpert View Post
    Some common mistakes:

    Too much slack in the strop. Pull it as tight as you can

    Too much pressure. Anything more than the weight of the razor is too much

    Lifting the spine. This often occurs at the end of the stroke. Listen, you can hear it when you do

    Slapping the edge against the strop when you roll the razor. It's called rolling, not flipping for a reason.

    Not stropping the entire edge. Use X strokes. They come naturally, don't try to force something else.
    +1 on these points and a nice even stroke. The stroke should be comfortable and rythmic. I see a lot of guys want to go incredibly fast like in the movies. Definite no-no. Too slow is not good either. Nice steady stroke with the blade completely flat on a taught strop will work. You can actually hear the edge go from a higher pitch to a duller pitch as you strop the razor. More so right after honing.

    And believe it or not, we still see people rolling the razor on the edge vise the spine. Don't do dat!!

    Have fun,

    Lynn

  9. The Following 3 Users Say Thank You to Lynn For This Useful Post:

    JeffR (04-16-2009), rastewart (03-12-2009), STF (10-30-2019)

  10. #17
    Stubble Slayer
    Join Date
    Jan 2009
    Location
    Alexandria, VA
    Posts
    708
    Thanked: 171

    Default

    The hardest part for me so far, and the reason I feel the need to go so slow, is that it's so easy for the blade to not be perfectly flat on the strop. A tiny tiny movement, up or down, of the handle, and the blade is not flat on the strop. Plus, if the strop is twisting in it's swivel a little between or during a stroke, you have to constantly be adjusting the handle of the razor to adjust the levelness of the blade. I have no idea how some of you do it so fast and ensure that the blade stayed perfectly flat through your quick stroke! It's easier if you use some pressure, but to do no pressure and do it, it's hard! I need a lot more practice I think.

    As an aside, should I be using soap on my smooth cotton strop from Tony Miller? Or should I just use it as it came (dry)?
    strangedata likes this.

  11. The Following User Says Thank You to pjrage For This Useful Post:

    jlands3 (01-30-2012)

  12. #18
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I use my strop from Tony as it was received. I have other dedicated pasted strops. I believe it is best to leave my main strop as is.

    Speed comes with practice. It develops as a person becomes proficient with the stroke. I always set my strop up on a door knob. I believe that it approximates the height that barbers used when the strop was hooked to their barber's chair.

    I think that is an optimal height to work from and I do think it makes a difference. YMMV. I see pics of guys who have their strop at a higher level and are working even at shoulder height. I think that would make it more difficult although I must confess I haven't tried it.

    Practicing flipping the blade without moving the arm may be a good thing for beginners. The barber manual instructs that to be done . I am well beyond that but if someone is having trouble with turning the blade it sounds like a good way to get the hang of it.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  13. The Following User Says Thank You to JimmyHAD For This Useful Post:

    STF (10-30-2019)

  14. #19
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    Alan, can you elaborate on proper dressing of the strop. I have pretty much used mine as is.


    I believe its important not to overpregnate the strop with gunk, particularly anything that interferes, even at an unobservable level, with its flatness.

    I think there is also a correlation between the strops slickness and the number of passes required to attain a good edge.

    I'm going to do some experimenting with "wet" oily leather soon and see what that does.

    I like to oil my strop then let the dry naturally.

  15. The Following 4 Users Say Thank You to AFDavis11 For This Useful Post:

    Croaker (04-18-2009), JimmyHAD (03-06-2009), rastewart (03-12-2009), STF (10-30-2019)

  16. #20
    Still hasn't shut up PuFFaH's Avatar
    Join Date
    Oct 2006
    Location
    Poole, Dorset, UK
    Posts
    593
    Thanked: 44

    Default

    Experimenting with the height your strop is mounted at can significantly alter stropping performance.
    I set my strop hook height by standing upright and to attention so to speak. Then with my arm straight down and fist clenched, mark to the underside of the fist and attach hook to this level.
    With the end of the strop hooked on and the hand end pulled taught to my belly button, I get a good down angle to the strop and my hand holding the razor wont stray over the decals or strop iron work. This is with a body attitude of approx 40 deg to the strop.
    For some reason I also set my pasted strop hook at nose tip height. This height can work for finishing strops but the razor flip does require wrist action at the top of the stroke.
    Making sure the strop is locked to the body at held end helps by allowing you to use your body weight to apply tension to the strop, not with the arm. This take one factor out tof the process leaving you free to concentrate on razor stroke and pressure.

    PuFF

  17. The Following User Says Thank You to PuFFaH For This Useful Post:

    jlands3 (01-30-2012)

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •