Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree12Likes

Thread: First time using diamond spray

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default First time using diamond spray

    Well on saturday my SRD modular paddle strop came in and I was really looking forward to using the diamond spray. I have a 5/8 dovo black star in red pakka scales that needed to be touched up. Out of the razors i purchased from SRD this one wasn't quite as sharp as the others I have received but it still did the job so I never sent it back to be honed again. Anyways, this afternoon I did 10 light passes on the wool felt treated with the diamond spray followed by about 60 passes on the leather and went on to shave. It almost feels like the diamond spray may have chipped the toe of the razor. Is this even possible? As a result I got a few knicks during the shave today. Where should I go from here, Im not really sure how to tackle this?

  2. #2
    lobeless earcutter's Avatar
    Join Date
    Feb 2012
    Location
    Kansas
    Posts
    4,864
    Thanked: 762

    Default

    That's just odd... and a let down. Not sure it matters, but what micron spray were you using?

  3. #3
    Senior Member mjsorkin's Avatar
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    1,139
    Thanked: 173

    Default

    pwm,

    So you feel that the razor is a little duller at the toe than it was before?; or sharper yet you feel something scratchy? Either way, it's impossible for me to tell what happened just from reading the post. My guess would be that the spine of the razor lifted slightly during stropping.

    If you have a loupe, you can look at the toe to see the edge a little better. Maybe it's reflecting light from the very edge at the toe end but not towards the heel?

    Van Gogh (earcutter),

    My paddle came with a bottle of (unlableled) 0.5 micron spray.

    Michael
    earcutter likes this.

  4. #4
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    I was using 15 Carat .5 Diamond Spray that came with with the modular paddle. The bottle was SRD if brand makes any difference. Im starting to think what if i moved the razor while stropping and pressure ended up being applied to the toe causing it to chip. I dont have loupe so I cant really see what happened but I do know something is off.

  5. #5
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    Something sharper and scratchy. Perfect way to put it.

  6. #6
    Senior Member Cove5440's Avatar
    Join Date
    Jul 2009
    Location
    Brampton, Ontario
    Posts
    635
    Thanked: 121

    Default

    My first thought was that some feel the diamond sprays make the edges harsh. That being said, if it's only the toe, must be something else. Do you have a camera that can take a close up? That may help you and us see what's going on.

  7. #7
    Member
    Join Date
    Mar 2012
    Location
    Boston, MA
    Posts
    31
    Thanked: 1

    Default

    I do but wont be able to get to that till tomorrow afternoon. I have a big exam tomorrow and well I already spent enough time procrastinating today. Photography is a hobby of mine and if I start taking pictures there goes my exam lol.
    gssixgun and Cove5440 like this.

  8. #8
    Senior Member blabbermouth
    Join Date
    Jan 2011
    Location
    Roseville,Kali
    Posts
    10,432
    Thanked: 2027

    Default

    I fiddled with Diamond spray,I think you can take out an edge very easy with that stuff.

  9. The Following User Says Thank You to pixelfixed For This Useful Post:

    Cove5440 (06-04-2012)

  10. #9
    Senior Member Cove5440's Avatar
    Join Date
    Jul 2009
    Location
    Brampton, Ontario
    Posts
    635
    Thanked: 121

    Default

    Quote Originally Posted by pixelfixed View Post
    I fiddled with Diamond spray,I think you can take out an edge very easy with that stuff.
    Take out? As in damage it? Hmm. Haven't had a chance to try it. I'll have to keep that in mind if I do.

  11. #10
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4942
    Blog Entries
    2

    Default

    If the edge is actually chipped, it is doubtful that it came from applying the .5 diamond on felt. Many people get small nicks on their razors from hitting them on faucets, sinks and whatnot including the scales and never notice it happening. Straight razors have very delicate edges and it doesn't take much. I have done this myself never did figure out what I did.

    I usually recommend spraying on the .5 diamond 6-8 inches away from the felt going up and down the felt strop twice. Then let the felt dry over night, ready for use the next day. This application is usually good for 12-24 uses.

    I used to recommend 10 weight of the blade stropping strokes on the felt for refreshes and after honing, but have been more and more going to around 5 strokes. If needed after testing, maybe a couple more. Following the stropping on .5 diamond, I usually do 20 strokes on my poly webbing followed by 50-60 on leather. It is really important when doing the stropping, like honing to make sure the entire blade edge and spine are on the felt evenly as you drag the razor back and forth for your stropping strokes. Uneven or too much pressure will definitely effect the results.

    Have fun.

  12. The Following 5 Users Say Thank You to Lynn For This Useful Post:

    Cove5440 (06-04-2012), lloydw (06-21-2012), markbignosekelly (07-31-2013), niftyshaving (06-05-2012), Setek (03-13-2013)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •