Results 1 to 10 of 14
Thread: Help with a Lipshaw please
Hybrid View
-
09-09-2014, 01:14 AM #1
- Join Date
- Sep 2014
- Location
- St. Louis
- Posts
- 3
Thanked: 0Help with a Lipshaw please
Newb here. I have a Lipshaw Model B Microtome. I would like to replace the leather. However, it seems to be glued to the pad. The leather is nailed down at the ends with 5 tiny nails. I would like to order Neil Miller leather but I'm not sure replacing it is possible. HELP! Thanks guys.
-
09-09-2014, 01:27 AM #2
Welcome Dave,,,,,
Can you shoot some photos of it in detail & I'm sure someone will give you some advice.
-
09-09-2014, 02:17 AM #3
Yeah, Welcome! We have an introduction subforum in the beginner's forum. Get up there, Dave, and introduce yourself to everyone!
HOPEFULLY, you are not speaking of a Lipshaw Microtome blade? They look like this! Lipshaw made some older variations of microtome strops which were simple blocks of wood with strops tacked to them. Perhaps this is what you have? Pics, Please!"Don't be stubborn. You are missing out."
I rest my case.
-
09-09-2014, 09:34 AM #4
- Join Date
- Dec 2011
- Location
- I'm Gonna Spend Another Fall In Philadelphia
- Posts
- 1,926
Thanked: 495I have 3 standard Lipshaw Microtome strops they have grommets that hold the leather down on the felt or rubber underlay with metal hooks. 2 hooks at the rear 2 hooks at the top with the top also having a locking screw or locking spring vilear pin.
You might be talking about one of these. This is a Lipshaw leather clad strop that's bonded to the felt underlay and wood block.
I don't have any nails but then Lipshaw changed alot of there units thru time with upgrades in hardware etc.
If its like this Lipshaw block, you might have a problem separating the components. Might not be worth the work. It could be better to start off from scratch with the raw materials and build your own.
Show some photos of the unit for us to get a better understanding of what your dealing with.
-
09-09-2014, 04:48 PM #5
- Join Date
- Sep 2014
- Location
- St. Louis
- Posts
- 3
Thanked: 0
-
09-09-2014, 05:07 PM #6
Well, you might convince old Nei...Earl Miller to send you a piece at your dimensions and tack it on. OR SRD sells replacement strop panels in a variety of leathers you could cut and fit. That is an early version of the ones Tarkus pictured. What shape is the black strop in? The leather may be fine. Lipshaw used good leather if it is not cut or too dry.
Some leather cleaner/conditioner might help?"Don't be stubborn. You are missing out."
I rest my case.
-
09-09-2014, 10:54 PM #7
- Join Date
- Dec 2011
- Location
- I'm Gonna Spend Another Fall In Philadelphia
- Posts
- 1,926
Thanked: 495The classic Lipshaw in photo here is the best stropping system going.
Sadly trying to find one in good working order is not an easy thing. And worst of all, myself and Sharptonn bought so many of these units all the eBayers assume there's a huge demand and the prices skyrocketed.
Sorry my bad.
Har!!!