Results 1 to 10 of 13
Hybrid View
-
08-03-2016, 11:51 PM #1
Strop "draw". What's it doing to the edge?
I recently finished reviving an old leather/linen strop. The leather felt hard through the feedback of the razor with little to no "draw". The shave felt fine (just once on this strop so far) but it's making me wonder about, or possibly over-think, a couple things. What, if any, effect does more or less draw have on an edge? Can steps be taken to increase or decrease a strop's draw if needed?
-
08-04-2016, 12:07 AM #2
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,552
- Blog Entries
- 1
Thanked: 3795Draw is resistance, or friction, to the motion of the blade relative to the strop. As far as I can tell, the degree of draw has no apparent correlation with any altered effect on the blade.
Added neatsfoot oil can increase the draw of some strops, but it is easy to overdo it so it should be added in very small increments.
-
-
08-04-2016, 12:14 AM #3
A little neatsfoot oil will increase draw. A little goes a very long way. An old barber friend said that stropping 'straightens the edge.' Realigns it maybe ...... edge if a razor us mighty fine.
I don't know if heavier draw will necessarily do more. Seems like it would, but I couldn't say for sure. I like a light draw myself. When I first started in the sport I felt like a razor might be pulled out of my hand with a heavy draw latigo. Went to horsehide instead and tried the latigo again a couple of years later. I had learned to strop well enough that it wasn't a problem but I still prefer the horsehide.
Edit ........... Ron beat me too the punch .......... great minds think alike.Be careful how you treat people on your way up, you may meet them again on your way back down.
-
-
08-04-2016, 12:49 AM #4
OK, thanks. I had initially added a very small amount of neatsfoot oil when cleaning up the strop but was leery of adding too much. It still feels hard and rather dry (although flexible enough) so I will go ahead and add a small amount more.
-
08-04-2016, 03:02 AM #5
Like Jimmy says, easy on the neetsfoot, if at all. I have always heard that it makes no difference, yet I use my heavy draws on wedges and lighter ones on hollows. All about the shave, for me.
I will add that I have a black bridle panel from Neil Miller which I over-oiled several years ago.
Awesome, yet messy still. Works a treat. Getting less messy as we go.Last edited by sharptonn; 08-04-2016 at 03:07 AM.
-
08-04-2016, 03:22 AM #6
- Join Date
- Nov 2012
- Location
- Across the street from Mickey Mouse in Calif.
- Posts
- 5,320
Thanked: 1185There are 2 kinds of neetsfoot oil also. 1 has petroleum additives and will eat the leather up. Read the label.
I cringe when I hear saddle soap because most of that has wax in it. If you use the kind that doesn't your better off.
A better way to clean and add life to any leather is liquid glycerin. Once again look for pure and watch for additives like wax. You don't have to worry about over doing it. It wipes off and takes the dirt with it. Makes leather supple again.Good judgment comes from experience, and experience....well that comes from poor judgment.
-
-
08-04-2016, 04:20 AM #7
- Join Date
- Aug 2013
- Location
- Orangeville, Ontario
- Posts
- 8,463
- Blog Entries
- 1
Thanked: 4207"Depression is just anger,, without the enthusiasm."
Steven Wright
https://mobro.co/michaelbolton65?mc=5
-
The Following User Says Thank You to MikeB52 For This Useful Post:
ny70 (08-04-2016)