Some projects with a few old strops

Some strop projects to-day...
Figured a way to get some gold into the stampings on my old Tripoli boarhide strop.
Looks pretty good. Lotsa work...

Attachment 290722Attachment 290723


Took down some old Kanoyama projects I have been contemplating.

Attachment 290724Attachment 290725Attachment 290726Attachment 290727
Too bad the former owner in Japan must have used these on tools or something.
Lengthwise scratches on them, the K3000 is not so bad. The 4P, however, has several light gouges where the user must have gotten carried away while setting a chisel or something down. :(
No flaps, yet some light gouges.
Think I will play with the 4P first. Some light sanding will be involved.
Don't think they will come out. Reckon I will get it usable, anyway.
I suppose I cannot screw it up any more than it is if I go lightly.
Attachment 290728

Nice! How do you get gold back into the lettering?

Quote:

---

Originally Posted by tintin

Nice! How do you get gold back into the lettering?

---

After some experimentation, I sanded the area with 1000 wet/dry using a block really good to try and eliminate any irregularities around the stamps which would hold the gold (rubNbuff).
Then, a piece of printer paper very lightly smeared with mink oil rubbed lightly over the stamps to help the gold come off the top as best possible. Rubbed in just enough gold to completely fill the letters and began with a dry paper towel around and in between the text.

Then, a paper-towel with mink-oil absorbed to do same.

I basically then alternated the fine sandpaper block and the mink-oil towel until it looked best while avoiding pressure which would remove it from the stamps.
LOTS of hand/finger-work.

I could have gone over it again for better results, I think.
Yet I called it good enough, for I am lazy! :)

you can send the Pelican my way to help you test the work you do it ! Tc

After several passes, my Pelican strop is definitely usable.


I settled on 325 on a piece of rubber hose on the problem spots, followed by block sanding the whole thing with a 500 Diapad up and down to smooth it out. I then wiped the dust off with a damp microfiber and allowed to dry for a half hour and lightly hit everything with a 30 mesh diamond paper to smooth.
Damp microfiber again and allow to dry again.
Constantly cleaning the leather off the abrasives goes without saying.
Repeat!

Just stropped a razor on it and it is fine. I will go a while longer for cosmetic purposes and then a progression of micromesh. Then some mink oil.

What I DON'T want to do is sand off the shell anywhere. Looking at the sides, it seems thick enough yet.

Attachment 290745

Nice work on the Golding Tom, as well as the refurb on the pelican.
Took a strong resolve to start rubbing that horsehide I reckon..
Worthy results as per pics.
:tu

Quote:

---

Originally Posted by MikeB52

Nice work on the Golding Tom, as well as the refurb on the pelican.
Took a strong resolve to start rubbing that horsehide I reckon..
Worthy results as per pics.
:tu

---

Thanks, Mike!
All of the abrasives I am using are quite worn. Not like I am blasting through the leather.
It's so much smoother, nicer, and clean.
the damp wipes are getting moisture back in. I am impressed how well it's going.
Tempted to get them all-out, yet the possibility of going through the shell is there.
Strops like butter. Likely getting time to quit. But can I? ;)
Attachment 290754

Looks like a successful project Tom. It’s your attention to detail that puts your projects over the top.

Quote:

---

Originally Posted by RezDog

Looks like a successful project Tom. It’s your attention to detail that puts your projects over the top.

---

Thanks, Bruv! I figure 2 more rounds to add legitimacy to what I have learned will be enough!
Still have the fabric to clean...Hardware, etc.

Onward to the K3000 which features a thick felt secondary!

Well, I seem to be where I wanted to get with these.
I was tired of sanding, so I went to the micromesh up to the 12000 and gave them a light coat of mink oil. The Pelican is a bit rougher, but seems to strop better than the K3000 (which strops heavenly!).

For the sake of them being old, I lightly cleaned the secondaries and turned them to the best-looking sides and scrubbed the hardware with a toothbrush and some barkeeper's friend. I even reused the flat-head screws and nuts.
Then, I chose some Razorfeld strop-socks I felt went well with them. Done! :D

Attachment 290811

So...Anyone have any experience with the felt secondary?

Attachment 290812