Results 1 to 7 of 7
Like Tree17Likes
  • 11 Post By JellyJar
  • 2 Post By Brontosaurus
  • 1 Post By PaulFLUS
  • 2 Post By RezDog
  • 1 Post By RezDog

Thread: Finished my new paddle strop

  1. #1
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default Finished my new paddle strop

    It's been a bit since I last posted. I finally got some time and thought I'd share this project I finished a couple of weeks ago.

    I decided to make a new paddle strop since I haven't cut my original in a while, kind of a self-reward thing . I wanted to do something a little different and went with hemp webbing and horsehide. The handle material I chose was oak.

    Name:  Starting materials.jpg
Views: 118
Size:  85.1 KB Name:  starting materials close.jpg
Views: 115
Size:  95.7 KB

    I got some 3" webbing with a herringbone pattern from https://www.rawganique.com/hemp-webbing-s/122.htm They had good customer service and the price was right.

    The horse hide I got from https://www.zackwhite.com/Horse-Leather_c_265.html I went with the 7/9oz option and the piece I got was closer to 7.

    After cutting and shaping the paddle I decided to torch the wood a little to bring out the grain and finished it off with some dark walnut stain.

    Name:  Final sand and flame.jpg
Views: 102
Size:  61.9 KB Name:  Flamed grain.jpg
Views: 114
Size:  76.2 KB

    I cut a slightly oversize piece of the leather and glued it up. After it thoroughly dried I trimmed it to the edge of the paddle.

    Name:  Leather glued.jpg
Views: 113
Size:  89.3 KB

    I treated the webbing by soaking and pounding it with a smooth mallet until no color came out in the soak and the edges were nice and flat. I also did a bunch of "shoe shine" work over a smooth metal pole. I brought out the torch again to burn off any loose fibers and to further soften the material (recommended by the seller).

    I ran a line of fray check across the webbing and cut through the line of fray check. After gluing I repeated the fray check/cut to trim off the long end.

    Name:  Fray check.jpg
Views: 103
Size:  41.5 KB Name:  end close.jpg
Views: 108
Size:  93.5 KB

    Finally, I burnished the leather with a highly polished piece of ebony until it had a nice glossy/satin finish and added a piece of brown and tan nylon boot lace to hang it up.

    Name:  leather final.jpg
Views: 108
Size:  46.4 KBName:  cloth final.jpg
Views: 101
Size:  52.7 KB

    I've used it a few times now and am quite pleased with it. It's not perfect, but I'm happy. The horsehide is a lot harder and denser than my cowhide strop, and the draw was a lot faster. I slowed it down a bit with a few oil treatments. It's still faster, but I like the feel and my edges are still giving good shaves.
    O'Toole's commentary on Murphy's Law: Murphy was an optimist.

  2. The Following 4 Users Say Thank You to JellyJar For This Useful Post:

    BobH (08-23-2020), markbignosekelly (08-24-2020), ppetresen (08-24-2020), RezDog (08-23-2020)

  3. #2
    Senior Member Brontosaurus's Avatar
    Join Date
    Feb 2011
    Location
    Les Vosges, France
    Posts
    924
    Thanked: 185

    Default

    Very nice. I've used horsehide from Zack White as well. Sometimes they roll the leather the wrong way out in shipping, so it's important to notify them in advance while placing the order.
    Striving to be brief, I become obscure. --Horace

  4. The Following User Says Thank You to Brontosaurus For This Useful Post:

    JellyJar (08-23-2020)

  5. #3
    Senior Member blabbermouth PaulFLUS's Avatar
    Join Date
    Dec 2018
    Location
    Gainesville, FL
    Posts
    5,872
    Thanked: 594

    Default

    Nice work. Enjoy it.
    JellyJar likes this.
    Iron by iron is sharpened, And a man sharpens the face of his friend. PR 27:17

  6. #4
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    Nice project. When I made a hemp fabric piece for my hanging strop I did pretty much the same thing and from what appears a similar source.
    :-)
    ppetresen and JellyJar like this.
    It's not what you know, it's who you take fishing!

  7. #5
    Senior Member
    Join Date
    Dec 2016
    Posts
    283
    Thanked: 61

    Default

    Really nice, I love this! I recently did something similar too. My kids got a hold of my Tony Miller vegan strop but there was a section that was about 14 inches that was still usable so I carved a handle from birch and then glued it on. It definitely takes some getting used to as it doesn't have even the flex that nice thick piece of leather offers. I didn't even consider putting a fabric component on the reverse side! How do you folks -- Rez, JellyJar, and anyone else who has tried -- find the fabric on a paddle?

    Thanks for sharing!

  8. #6
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default

    Quote Originally Posted by ppetresen View Post
    Really nice, I love this! I recently did something similar too. My kids got a hold of my Tony Miller vegan strop but there was a section that was about 14 inches that was still usable so I carved a handle from birch and then glued it on. It definitely takes some getting used to as it doesn't have even the flex that nice thick piece of leather offers. I didn't even consider putting a fabric component on the reverse side! How do you folks -- Rez, JellyJar, and anyone else who has tried -- find the fabric on a paddle?
    Ooh, sorry to hear about your strop. At least you were able to salvage something from it.

    I can't really comment on hanging vs. paddle since (believe it or not) have never used a hanging strop. I started with paddle strops for woodworking several decades ago and just used what I knew when I started in with the straights. The first fabric/leather strop I did was a fairly thin piece of canvas glued to pine. It was a bit stiff and had very little give. I eventually added two additional layers of the same fabric and it added some cushion. I've heard of some paddle strops using a layer of felt under the fabric side to add some give. This particular webbing was quite a bit thicker than the fabric I used for my first, so I went with it as is, and it seems to work fine. I imagine it has a much stiffer/less forgiving feel than a hanging strop, but I'm used to it so...
    O'Toole's commentary on Murphy's Law: Murphy was an optimist.

  9. The Following User Says Thank You to JellyJar For This Useful Post:

    ppetresen (08-24-2020)

  10. #7
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    I did not put the hemp fabric on a paddle strop, it is on a hanging strop. I do like the hemp fabric on the hanging strop. I do have a paddle and it’s treated leather. I also have a lipshaw bench strop. I love to strop!
    ppetresen likes this.
    It's not what you know, it's who you take fishing!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •