Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree4Likes

Thread: What is a good adhesive for applying leather to a wood surface?

  1. #1
    Senior Member Nuntits's Avatar
    Join Date
    Feb 2012
    Location
    Alberta, Canada
    Posts
    236
    Thanked: 19

    Default What is a good adhesive for applying leather to a wood surface?

    Hey all,
    A week ago I found an old four sided strop at an antique store. The leather belt is destroyed as is the leather pads on the small wood block, but the hardware is fully functional. I havn't picked it up but I have been thinking I should to restore it. So as the title inquires, What would be a good adhesive for gluing leather to wood?

  2. #2
    Senior Member PaulKidd's Avatar
    Join Date
    Aug 2010
    Location
    Sonoma County, California
    Posts
    796
    Thanked: 236

    Default

    Try "Barge Cement". It's a contact glue used by shoemakers, like rubber cement.

    Clean and flatten the wood surface with a sanding block, apply a thin coat of Barge
    Cement to both the wood and leather surfaces, let it dry a bit, then carefully position
    the leather on the wood. Clamp the project together for 24 hours, and she'll be right,
    mate.
    cudarunner likes this.

  3. The Following User Says Thank You to PaulKidd For This Useful Post:

    Hirlau (05-19-2012)

  4. #3
    Senior Member Nuntits's Avatar
    Join Date
    Feb 2012
    Location
    Alberta, Canada
    Posts
    236
    Thanked: 19

    Default

    Sounds good, do you know what kind of retailer sells that? Would I find it at a wood works shop?

  5. #4
    Senior Member PaulKidd's Avatar
    Join Date
    Aug 2010
    Location
    Sonoma County, California
    Posts
    796
    Thanked: 236

    Default

    Quote Originally Posted by Nuntits View Post
    Sounds good, do you know what kind of retailer sells that? Would I find it at a wood works shop?
    Amazon.com lists it, so you might have a look there. Unless you plan on doing many such projects,
    there's no need to buy a large supply...you won't need much, so a small tube should be enough.

    A couple of additional comments: using Barge Cement is a pretty much permanent solution, ie it
    will take alot of work to remove/replace the leather in the future; also, it's best to use a thin
    application of the cement...it's pretty thick and gooey stuff, but it can be thinned out with
    acetone or MEK.

    Good luck!

  6. #5
    Ecl
    Ecl is offline
    Does this title make me look fat? Ecl's Avatar
    Join Date
    Apr 2011
    Location
    Medieval Kansas
    Posts
    148
    Thanked: 27

    Default

    Or use Eco Flo Tanner's Bond from Tandy. It's inexpensive and remarkably strong, cleans up with soap and water. I've used it for leather-to-leather bonding as well as bonding the velcro strips in all my hone-pouches.

    You can pick it up today, since there are Tandy stores all over, even in sinister foreign countries like that there Canada place.

  7. #6
    Senior Member blabbermouth Theseus's Avatar
    Join Date
    Mar 2011
    Location
    Ohio
    Posts
    2,786
    Thanked: 421

    Default

    3M Super 77 spray adhesive is what I've used and usually recommend. It's a great general purpose adhesive.

  8. #7
    Senior Member blabbermouth
    Join Date
    Jan 2011
    Location
    Roseville,Kali
    Posts
    10,432
    Thanked: 2027

    Default

    What he Said^^^^^^^^^^^^any contact cement will work.
    Montgomery likes this.

  9. #8
    Senior Member Nuntits's Avatar
    Join Date
    Feb 2012
    Location
    Alberta, Canada
    Posts
    236
    Thanked: 19

    Default

    Thanks for all of your help guys!

  10. #9
    xuz
    xuz is offline
    Senior Member
    Join Date
    Mar 2012
    Posts
    102
    Thanked: 15

    Default

    I've made some 50 hard-backed strops and eventually settled on spray adhesives as Theseus mentioned before.
    They are about 5 to 7 bucks at any home improvements store (like Home Depot) for a large can.
    It tends to spread very evenly and thinly (so there is no glue bump),
    and the adhesive is only on the leather so you can just stick it onto the leather. No fuss.

    The messier part of the spray adhesive is the spraying part.
    I use masking tapes to cover the usable side and then quickly and in a smooth motion spray the backside of the leather.
    Once you pop it on to the hardback, just use a roller to smooth out the leather.
    If you reflect light on the leather (like you are sighting down a rifle), it should appear very flat.
    Good luck.

  11. #10
    Senior Member blabbermouth
    Join Date
    Jan 2011
    Location
    Roseville,Kali
    Posts
    10,432
    Thanked: 2027

    Default

    For the best bond,spray both wood and leather.
    Haroldg48 likes this.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •