Results 1 to 7 of 7
Like Tree7Likes
  • 7 Post By EdB

Thread: Made a couple of leather strops

  1. #1
    EdB
    EdB is offline
    Member
    Join Date
    Jan 2013
    Location
    Qld. Australia
    Posts
    40
    Thanked: 2

    Default Made a couple of leather strops

    Hi Guys, I went out and got some leather and made a couple of strops for myself, cut out the handles out of a piece of Jarrah wood I have left over from making some furniture years ago. The bridle leather is 6mm thick x 73mm wide with a heavy suede on the back and its usable length is 51cm with a 74cm overall length, the hook is from 4mm stainless. The second I made from a 5mm thick smaller leather piece and ended up with a usable length of 34cm and same width. Coated them with Neatsfoot oil on both sides and the handles. I still have one more small piece of leather left so might turn it into a paddle board strop at a later stage. I think they should last for quite a while.
    Attached Images Attached Images  

  2. #2
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Very nice looking pieces.

  3. #3
    Senior Member blabbermouth 10Pups's Avatar
    Join Date
    Nov 2012
    Location
    Across the street from Mickey Mouse in Calif.
    Posts
    5,320
    Thanked: 1184

    Default

    Nothing like doing it yourself. They look great!
    Good judgment comes from experience, and experience....well that comes from poor judgment.

  4. #4
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    Nice, are those copper rivets?

    Pick up a snap swivel and your all set.

    Nice work.

  5. #5
    EdB
    EdB is offline
    Member
    Join Date
    Jan 2013
    Location
    Qld. Australia
    Posts
    40
    Thanked: 2

    Default

    Thanks fellas, yes they are copper although I am not sure if I would call them a rivet in the traditional type of metal rivet, it's a rod with a flat end, you put it through a hole in something and then add a washer and then ball peen over the rod which forms a mushroom head which locks the washer on, same as the ones on razor scales but much bigger, I got them and the leather from a Saddlery manufacturer. I did think about getting a snap swivel, but as I hang it off a strong hook I put in the bathroom wall in the wall, the belt stays level when I strop and so didn't end up needing one.

    Cheers

    Ed.
    Last edited by EdB; 02-06-2013 at 07:22 AM.

  6. #6
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    Here’s what I 'm talking about, $1.25 at my local ACE Hardware.

    The swivel works great to vary the angle of the strop, to keep it on the same plane with the razor. This, I believe is one of the reasons people nick strops, trying to adjust the razor and your wrist to match the angle of the strop.

    It is much better to match the strop plane to your most comfortable stropping angle. Also works great for holding multiple strops.

    I attach it to a fixed point with a piece of Para Cord or a Carabiner. The best buck and a quarter, I’ve spent.

    I’m a big fan of making life easier.

    Name:  IMG_34421182.jpg
Views: 254
Size:  38.6 KB

    Name:  IMG_34441184.jpg
Views: 202
Size:  48.9 KB

    Name:  IMG_34451185.jpg
Views: 210
Size:  43.8 KB

  7. #7
    Member
    Join Date
    Jun 2007
    Posts
    83
    Thanked: 4

    Default

    beautiful work!I am inspired to try a project myself

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •