Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    Mar 2013
    Location
    Gent, Belgium
    Posts
    27
    Thanked: 3

    Default Juchten Solingen loom stop advice

    I have just purchased my first straight after 7 years with Dovo Shavette; Wacker Best Tradition. I bought straight from Mr Wacker and also bought the recommended Loom strop with one side green "fine" pasted (guessing it is CrO). I have attached a picture (hope it works).

    Should I get one with a canvas side/leather side? I ask because all advice for stripping is canvas and then leather.

    Hope the pics show up, using Tapatalk for the first time.


    Name:  ImageUploadedByTapatalk1363284051.767905.jpg
Views: 408
Size:  28.4 KB

    Name:  ImageUploadedByTapatalk1363282391.423823.jpg
Views: 381
Size:  52.7 KB

  2. #2
    Senior Member blabbermouth Speedster's Avatar
    Join Date
    Jan 2012
    Location
    Spokane WA
    Posts
    2,935
    Thanked: 704

    Default

    I think you are fine with your one strop so long as you clean the blade well before stropping. But, I'm sure it would be nice to have a non-pasted canvas side for those blade-cleaning strokes. Guess you have to decide if it's worth the extra expense of getting a second strop. Good luck!
    --Mark

  3. #3
    Senior Member Badgister's Avatar
    Join Date
    Aug 2008
    Location
    Montreal, Quebec
    Posts
    1,630
    Thanked: 260

    Default

    I have a similar loom strop and I am very happy with it. Make sure you are getting the entire edge on the leather, either by using an x pattern stroke or by stropping the upper half of the blade and then moving the edge higher to strop the lower half of the blade.

    The Chromium oxide side can be used once you feel the razor is pulling a little. 6 passes should be enough.

    Canvas has its benefits, but it is not necessary in my view. I rarely ever strop on canvas, but if you want a cheap alternative, you could always strop on your jeans on the thigh area.

  4. #4
    Junior Member
    Join Date
    Mar 2013
    Location
    Gent, Belgium
    Posts
    27
    Thanked: 3

    Default

    Really useful info! Thanks Speedster and Badgister! So the canvas is really a cleaning step before stripping on leather (or CrO if blade is dull). Good to know!
    Happy shaving!

  5. The Following User Says Thank You to Lenahaad For This Useful Post:

    hajo (03-16-2013)

  6. #5
    Member hajo's Avatar
    Join Date
    Jan 2013
    Location
    South-Germany
    Posts
    38
    Thanked: 11

    Default

    Hi,
    I have a additional question. I got same one this week but both sides pure leather only - for travelling ( I use a hanging strop usually).

    Is there a rule how to set/adjust the tension?

    Regards
    hajo

  7. #6
    Junior Member
    Join Date
    Mar 2013
    Location
    Gent, Belgium
    Posts
    27
    Thanked: 3

    Default

    From what I read, it seems that you need to tighten the loom so that there is little sag when stropping. Once you finish stropping, you need to release the tension on the leather - should help leather last longer in best condition. There is another topic somewhere regarding loom strops... Can't find the link though, apologies.

  8. #7
    Member hajo's Avatar
    Join Date
    Jan 2013
    Location
    South-Germany
    Posts
    38
    Thanked: 11

    Default

    Thanks Lenahaad - to release after stropping seems reasonable - this is a good hint - I plan only to use it when travelling.
    Regards Hajo

  9. #8
    Junior Member
    Join Date
    Mar 2013
    Location
    Gent, Belgium
    Posts
    27
    Thanked: 3

    Default

    Sounds good! Good luck!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •