Results 1 to 10 of 20
Like Tree3Likes

Thread: need help on this matters

Threaded View

semperfi6141 need help on this matters 01-23-2015, 12:12 AM
mainaman 3/16 sounds pretty thick for... 01-23-2015, 12:18 AM
criswilson10 I usually use 1/8" wide... 01-23-2015, 02:44 AM
bouschie There are a number of factors... 01-23-2015, 02:29 AM
rocarule 3/16 scales are just as easy... 01-23-2015, 05:22 PM
mainaman Can you share some tips? 01-23-2015, 05:24 PM
rocarule I am no expert but I am... 01-23-2015, 05:34 PM
mainaman It is easy for those that... 01-23-2015, 05:58 PM
rocarule As far as weight the scales... 01-23-2015, 05:41 PM
rocarule The theory still the same,... 01-23-2015, 06:05 PM
mainaman I do have the knowledge how... 01-23-2015, 06:08 PM
rocarule I will be posting some... 01-23-2015, 06:07 PM
rocarule I will just give me a minute 01-23-2015, 06:09 PM
rocarule Ok so let's pretend that you... 01-23-2015, 06:18 PM
pixelfixed I just re-scaled this is real... 01-23-2015, 06:23 PM
rocarule The easiest way to do it... 01-23-2015, 06:24 PM
rocarule Put some sand paper on your... 01-23-2015, 06:25 PM
rocarule Here is an extra tip to... 01-23-2015, 06:30 PM
rocarule In some materials you get an... 01-23-2015, 06:35 PM
mainaman rocarule, thanks for the... 01-23-2015, 06:40 PM
  1. 01-23-2015, 12:12 AM #1
    semperfi6141 is offline
    Senior Member semperfi6141's Avatar
    Join Date
    Feb 2014
    Location
    south texas
    Posts
    196
    Thanked: 7

    Smile need help on this matters

    # 1 is 3/16" scales harder to work on than 1/8"scales?Have new 3/16" scales with 3/16" spacer or wedge for the bottom,do I need to change the spacer to 1/8"?
    # 2 how can you tell the age of a older razor,is it like the designs,noticed English,german have little different designs.
    # 3 I have noticed some people refuse to hone the new razors,but will work on the old ones?Have been told that the new dovo's and other new razors are stamped from the factory and not hand made like the old ones or maybe the steel is not the same?
    Would appreciate some feed back james

    well, I got a wedge with the scales but its a 3/16"wedge,total height would be 1/2"---sounds like a monster wade butcher 7/8" or 1" razor.Either that or start sanding scales and wedge.
    Thank you for the feed back guys.
    Last edited by semperfi6141; 01-23-2015 at 02:30 PM. Reason: message
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules