Printable View
Just wondering about doing inlays on scales. I haven't come across really any videos on adding them to scales. I've found a few on removing them, but I was wondering about people's experience with doing inlays. Feel free to share pictures of your work as well as any knowledge or links to good how to info. Was wondering about things to look out for with different materials both in terms of the scale and the inlay. Is it more difficult to do an inlay in a horn scale for instance...
I think horn is probably one of the easier materials to add inlays - here is an example - it was my first attempt using three different forms of Mother of Pearl.
http://i1270.photobucket.com/albums/...psf73041a1.jpg
I used router bits for the holes then used glue to attach a piece of MOP to the other end of the drill - then turned the discs on a rotary sanding disc. They were inserted using CA and finally sanded/polished flat.
By the way, it's much easier to buy pre formed discs - they are available in lots of different sizes so I used them on combs that I made for my grand-children at Christmas.
I've yet to try any other forms of insert apart from round pieces but, like you, it's something I'm thinking of when I have more time.
Nice job! I saw Mastro Livi do that on one of his videos and thought I should try one day.
http://straightrazorpalace.com/works...aving-jig.html
This was my effort with a bit of tutorial if it helps
That's where I got the idea from - or should I say that's the process I copied? I then found that Robsbits on Ebay - who I've used for horn and scale material before, sells MoP and other materilas such as Paua in perfect discs in a range from about 2mm upwards.Quote:
Originally Posted by Atchbo
Still, the Livi method is good if you wanted to use any other material you have on hand.
Just a few to see what you can do.
I use a laser so it makes it easy.
http://straightrazorpalace.com/works...s-project.html
V/R
Tim
Here are two I did, I simply removed inlays by soaking in acetone. After deciding where I wanted them positioned I spread a thin coat of CA on the scales, laid the inlay on the scales, positioned and pressed down to seat against the scales using tweezers to keep CA off my fingers, used a tooth pick to spread excess CA fairly evenly over inlay being careful not to move inlay. When CA was dry I simply sanded smooth being careful not to sand into the inlay.
I saw that too. Which got me thinking.
What I'm thinking of doing at first anyway is something like an inlaid script on the scales. Thinking of a proper inlay material has got me perplexed a bit due to lack of general knowledge. A smooth flowing cursive word is the effect I'm after. Thinking once I get the script cut in maybe braising silver into the cavities, then sanding it down till the script looks clean and flush with the rest of the scale. Basically inlaying a scaled down version of this script into a scale is my goalQuote:
Originally Posted by Substance
Attachment 196138
I saw that too. Which got me thinking.Quote:
Originally Posted by Atchbo
Before folks like USA knife maker started making water jet cut patterns for escutcheons/inlays, what a lot of folks would do would carve the inlay shape into the piece of material and then use a metal with a VERY low melting point to cast a pattern which they then used to cut everything.
ok, so what about re-installing an inlay that was removed with acetone...... and let's say the scales are acrylic..... how would one go about refitting the inlay into acrylic? other than CA glue ontop.... ie I would like to get it flush.
same principles apply
you need to cut the indent for the shape & depth of the inlay from the scale, then set it in with an acrylic compatible glue
fill with extra glue then sand flush to suit the scales
Attachment 198484
