A method for removing pins.

Устройство для штифтов буровых:
Attachment 197664Attachment 197665Attachment 197666Attachment 197667Attachment 197668Attachment 197669Attachment 197670Attachment 197672Attachment 197673Attachment 197674Attachment 197675Attachment 197676

that looks like a very nice setup you have there.

Nice rig Gipson. I may need to mock up something like this a s well, if I get hot and heavy into resto's.
Good work.

Wow, did you make that or re-purpose it?
Looks like it works a dream…

Quote:

---

Originally Posted by Euclid440

Wow, did you make that or re-purpose it?
Looks like it works a dream…

---

I've done specifically for the restoration of razors. With the help of the device can be easily removed pins.

dependent upon how tightly you snug in the scales with those wing nuts, I would put some sort of soft gasket material on the clamping sides of that jig. All that work aligning and securing the scales you would want to put deep scratches or crack them!

That is good thinking. :tu It gets everything straight as drilling. I could see it under a drill press as well.

Quote:

---

Originally Posted by TwistedOak

dependent upon how tightly you snug in the scales with those wing nuts, I would put some sort of soft gasket material on the clamping sides of that jig. All that work aligning and securing the scales you would want to put deep scratches or crack them!

---

Yes, of course you can put a lining. But we need to make sure that does not touch the metal handle and hold on the axis.
https://www.youtube.com/watch?v=HthBYPTNjxk

Quote:

---

Originally Posted by sharptonn

That is good thinking. :tu It gets everything straight as drilling. I could see it under a drill press as well.

---

Yes, it is universal.