Printable View
I have a Friodor 8/8 that currently has wood scales. The problem is they are too wide. The razor won't fit in my razorbox. I am looking for scales of the correct size that are thin. I don't really care about the color although plain black would be fine. Where do I find these? Thanks.
are you trying to source generic scales or Henckels scales.
Attachment 199152I would love Henckels Twinworks scales in the correct size but realize that may be difficult. I would be satisfied with simple, generic scales that are relatively thin.
what if you unbolt them & sand them down to the required thickness?
or convert to horn maybe as it holds well when very thin
That is also my experience is that horn bone and ivory have really good strength very thin. If you wanted a more modern look you could go with g-10 or Micarta. If you are not up for the task there are plenty of guys here that could fix you up. You do not see Henckels scales for sale very often. The only time I get rid of them is of they start having the pions get black because they are gassing off. That is a nice modern Henckels, the last of them actually.
It can be difficult to find a razor box that will fit a 7/8 and wider razor. It may not be just the scales.
You razor appears to be a new grind from Henckels Friodur blanks that were sold a few years ago with after market scales. I have two of these, one a Spanish point and the other a square point. Both are 7/8 width. I also have a 17 1/2 Friodur 7/8 with factory scales. The factory razor came in a red plastic box that fits the other two razors. The red plastic box is identical to the red plastic box in which my 5/8 Friodur was acquired. They might also fit the 8/8 width. I have sometimes seen these red plastic boxes being sold on e-Bay.
Never seen a 8/8 Henckels. Is the filework original? I really like it. I would probably just do as another member mentioned and sand them down. They are good looking scales.
I am not all that talented with this stuff. I hone all of my razors and do a very good job but it took me forever to get the hang of it. I have never taken the scales off a razor although I have some idea how it is done. I like the idea of keeping the wood scales but having them be about half as wide. The tang on this razor is very wide. With the scales, it is too much.
Tell me if i'm right on this. I would need a small peening hammer, pins and washers and sand paper. I have a vise with a platform for reinstalling the pins but am not sure how to hold the razor steady to get them off.
If you are not comfortable with this type of work, you could always send it to another member to have the work done. By the time you buy the tools/supplies/parts you probably could have paid to have it done professionally.
I know there are other members that do that kind of work, but gssixgun is the first that comes to mind (I watched one of his videos about repinning on youtube).
If you decide to do it yourself, you will also need something to cut the pins to size and something to remove the current pins/washers (file, pin vise, or drill).
I have rescaled many of these for shavingshop.com although that is not one of my rescales and I have one of my own. Couple things, the Spanish point grind is longer than your average blade. The generic scales you will find online will not fit. They are too short. Even the twinworks scales will not fit that razor. The square and round points are shorter length in the 8/8 and will work, but not the Spanish point. If length is your issue, you are stuck. You are not going to get shorter set of scales that will properly fit that blade if it is pure width, G10 or horn would work, wood would be too thin and break easy. Your pins are not pins, they are micro fasteners. They take real small Allen wrench and you can unscrew them and take it apart.
Attachment 199323
Attachment 199324
Those Pins look more like Torx bolts then peened pins look closely first
These razors are hard to fit scales too even custom ones are a pain because of the Tangs..
That is why the "Wedge" is so big :(
To do a traditional style set of scales you almost have to use a 3rd pin to get around the Tang..
Check the pins first then proceed from there,, post better pics of what you find and I will try and talk you through it, honestly I would NOT recommend this razor to anyone for a first set of custom scales..
You have the Tnag and the overly long heel to contend with on the 8/8, you can see where people have done all sorts of oddball stuff to Generic scales to get them to fit the 8/8 3rd Generation Friodurs
The horn scales pictured look terrific. I think, however, I might just leave it alone for awhile. It came in a large box and fits fine. It just doesn't fit in my 7 razor box. The razor takes an unreal edge. Almost too sharp. Overall, I like the razor but the odd width is a pain.
