Thread: Old Wade and Butcher Need some advice

I picked up an old W&B wedge with black horn scales period correct late 1800's. The scales are in good condition but dry and showing their age. How best to clean and polish the scales. The blade is in good condition and won't require much more than a dremel wheel and polish and a refreshed and sharpened edge. I want to get the horn in the best condition and I'm not interested in replacing them. I'm thinking some toothpaste , brush, and some wax. I have also thought some wet sanding w/2k or better might be an option. I'm looking for some ideas. Thanks in advance.

Originally Posted by Firebox

I picked up an old W&B wedge with black horn scales period correct late 1800's. The scales are in good condition but dry and showing their age. How best to clean and polish the scales. The blade is in good condition and won't require much more than a dremel wheel and polish and a refreshed and sharpened edge. I want to get the horn in the best condition and I'm not interested in replacing them. I'm thinking some toothpaste , brush, and some wax. I have also thought some wet sanding w/2k or better might be an option. I'm looking for some ideas. Thanks in advance.

Whatever you do, please stay away from a Dremel tool; neither on the blade, nor on the scales. If you've got the time, inclination, and supplies, go with hand sanding; you'll be glad you did.

Smooth shaving!

I hear you. I've used a dremel, felt wheel, and flitz on all of my previously restored old blades. I agree it take more care not to damage an edge. I've never used anything other than a felt wheel. The W&B has some nice etchings on the blade and I'm hoping to polish it with removing it , which I'm sure sanding would do. Thanks for reviewing my post.

Outback is the pro when it comes to horn, but...
You could drop the whole razor or pull the pivot pin and soak the scales in a bath of neatfoot oil for a couple of days. A week or more would be even better. Then clean and dry and polish however you plan on polishing.
Using a Dremel on horn is not needed or recommended but it's yours so... Be careful.

You can find a post by Outback that he recently posted on restoring scales in the "what are you working on" thread.

Hadn't though about neatsfoot oil. Sounds like a good idea. Thanks.
BTW. Guess I wasn't very clear. The dremel and felt pads are for polishing the steel.

I'll second the give the scales a nice long soaking in Neatsfoot oil. It will re hydrate them.

Bob